Prediction a of Tribocorrosion Wear Rate (RESEARCH NOTE)
نویسنده
چکیده مقاله:
Basic properties of the suggested phenomenological model of tribocorrosion wear are considered. Using a friction pair austenitic stainless steel-ceramic in acid electrolytes as an example, a good agreement between predicted data and experimental evidence was obtained.
منابع مشابه
Prediction of The Pavement Condition For Urban Roadway A Tehran Case Study (RESEARCH NOTE)
This report is the result of a research project on a pavement management system that was preformed by the Transportation Division of Iran University of Science and Technology. Information used in the project was collected from 20 zones of the Tehran Municipality. Any maintenance and repair system for roads is normally compared of a number of general and coordinated activities in conjunction wit...
متن کاملOptimal Control of Service Rate in a Service Center with Lapse (Research Note)
The purpose of this paper is to analyze the effect of a particular control doctrine applied to the service mechanism of a queuing process with lapse. It is assumed that the service discipline is FCFS (first come, first served), arrival process is Poisson, service time distribution is exponential, service process is one phase and the capacity is infinite. It is also assumed that the customer may...
متن کاملWear of CoCrMo alloys used in metal-on-metal hip joints A tribocorrosion appraisal
A good biocompatibility, excellent mechanical properties and high corrosion resistance characterize CoCrMo alloys. Therefore they are widely used for artificial joints in biomedical implants. However, the degradation of the implants during service life leads to the release into the body of toxic ions and wear particles. This continuous degradation is of concern for long-term stability of the im...
متن کاملThe Effect to Epsilon Phase on the Friction and Wear of Nitrided Die Steels (RESEARCH NOTE)
In this paper, the wear resistance and antifriction of epsilon phase layer and diffusion layer of gas nitrided D2 steel and M2 steel have been studied. The changes m wear mechanism of epsilon phase under the load from 20N to 200N are analysed. When the load is lighter than 100N, it is mainly oxidizing wear on friction surface. The adhesion, peeling off and abrasive wear appear on friction surfa...
متن کاملWEAR RATE PREDICTION OF GRINDING MEDIA USING BPNN AND MLR MODELS IN GRINDING OF SULPHIDE ORES
Nowadays steel balls wear is a major problem in mineral processing industries and forms a significant part of the grinding cost. Different factors are effective on balls wear. It is needed to find models which are capable to estimate wear rate from these factors. In this paper a back propagation neural network (BPNN) and multiple linear regression (MLR) method have been used to predict wear rat...
متن کاملSignal Prediction by Layered Feed - Forward Neural Network (RESEARCH NOTE).
In this paper a nonparametric neural network (NN) technique for prediction of future values of a signal based on its past history is presented. This approach bypasses modeling, identification, and parameter estimation phases that are required by conventional parametric techniques. A multi-layer feed forward NN is employed. It develops an internal model of the signal through a training operation...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 11 شماره 2
صفحات 109- 114
تاریخ انتشار 1998-05-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
کلمات کلیدی
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023