Nanocomposite Coating Based on Thermoplastic Acrylic Resin and Montmorillonite Clay: Preparation and Corrosion Prevention Properties

نویسندگان

  • Davood Jafari M.S. Student, Department of Inspection Engineering, Petroleum University of Technology, Abadan, Iran
  • davood zaarei Associate Professor, Department of Polymer Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran
  • Iman Danaee Associate Professor, Department of Inspection Engineering, Petroleum University of Technology, Abadan, Iran
  • Mohammadreza Shishesaz Associate Professor, Department of Inspection Engineering, Petroleum University of Technology, Abadan, Iran
چکیده مقاله:

Different amounts of nanoclay were incorporated into the acrylic resin matrix at 0, 1, 3, and 5 wt.% loadings. The coatings were applied on low carbon steel plates. Optical microscopy, sedimentation test, transmission electron microscopy, and X-ray diffraction were employed to investigate the dispersion of nanoclay in matrix. The corrosion resistance of coatings was evaluated by electrochemical impedance spectroscopy, polarization measurement, and salt spray test. In addition, pull-off and cross-cut tests were used for the assessment of coating adhesion to the substrate. The results indicated that the anti-corrosive properties of the acrylic resin were obviously increased by the addition of nanoclay. The nanocomposite coatings containing 3 wt.% clay showed the best corrosion resistance. Finally, the nanocomposites containing 1 and 3 wt.% showed the highest adhesion to the substrate.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

nanocomposite coating based on thermoplastic acrylic resin and montmorillonite clay: preparation and corrosion prevention properties

different amounts of nanoclay were incorporated into the acrylic resin matrix at 0, 1, 3, and 5 wt.% loadings. the coatings were applied on low carbon steel plates. optical microscopy, sedimentation test, transmission electron microscopy, and x-ray diffraction were employed to investigate the dispersion of nanoclay in matrix. the corrosion resistance of coatings was evaluated by electrochemical...

متن کامل

preparation and characterization of phenolic resin/montmorillonite nanocomposite

phenolic resins have been widely used for selective high technology applications due to their excellent ablative properties, structural integrity and thermal stability that make them appropriate for thermal insulation materials, wood products industry, coatings, moulding compounds and composite materials. polymer layered silicate nanocomposites based on montmorillonite (mmt) have attracted a gr...

متن کامل

Preparation and Evaluation of Epoxy-Clay Nanocomposite Coatings for Corrosion Protection

Polymer-clay nanocomposite coatings have attracted much attention because of impressive enhancements of coating properties. In this research, both commercially available and isophoronediamine-modified montmorillonite clays were used to obtain epoxy-clay nanocomposite coatings. These nanocomposite materials with different clay loadings in the form of coatings were applied to cold-rolled steel (C...

متن کامل

Synthesis of Polypyrrole/CeO2 Nanocomposite and its Application for Improving the Corrosion Protection of Acrylic Waterborne Coating on Mild Steel

In this work, polypyrrole/CeO2 nanocomposite (NC) was synthesized in the presence of methylorange as a reactive self-degraded soft template. The field emission scanning electron microscopy(FESEM) images indicate that the CeO2 NPs have a nucleus effect and cause a homogenous PPycore–shell type morphology with an encapsulation of the CeO2 core by the PPy shell. The effect ofNC on acrylic waterbor...

متن کامل

Preparation and Characterization (Mechanical and Water Absorption Properties) of CMC/PVA/Clay Nanocomposite Films

The aim of this study was to produce Carboxy Methyl Cellulose (CMC) and Poly Vinyl Alcohol (PVA) films and to enhance their properties by reinforcing them with nanoclay particles. Thus, nanocomposite films were prepared with blending of CMC and PVA, as a matrix and several filler loadings of nanoclay particles. The various formulations of nanocomposite films obtained with casting m...

متن کامل

Thermal Curing Behavior and Tensile Properties of Resole Phenol-Formaldehyde Resin/Clay/Cellulose Nanocomposite*

This study investigated the effects of layered clay on the thermal curing behavior and tensile properties of resole phenol-formaldehyde (PF) resin/clay/cellulose nanocomposites. The thermal curing behavior of the nanocomposite was characterized using conventional differential scanning calorimetry (DSC) and temperature modulated (TMDSC). The addition of clay was found to accelerate resin curing,...

متن کامل

منابع من

با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ذخیره در منابع من قبلا به منابع من ذحیره شده

{@ msg_add @}


عنوان ژورنال

دوره 6  شماره 1

صفحات  63- 76

تاریخ انتشار 2017-01-01

با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.

میزبانی شده توسط پلتفرم ابری doprax.com

copyright © 2015-2023