Simplified Approach for Torsional Analysis of Non-homogenous Tubes with Non-circular Cross-sections
Authors
Abstract:
In this paper a method is presented for torsional analysis of non-homogeneous tubes with arbitrarily shaped cross-sections. A previously presented method based on Bredt’s theory is extended to achieve formulas for torsional analysis. Shear modulus varies through the thickness according to a power law distribution. To validate the accuracy of the presented formulas for angle of twist and shear stress, calculated results are compared with available analytical and numerical data. Moreover, the effects of thickness, bluntness of corners and cross-sectional shape are investigated. The presented formulas are relatively accurate, simple and applicable to thin to moderately thick cross-sections with constant wall thickness. Based on the method presented herein, one can achieve desirable maximum shear stress and angle of twist for a polygonal non-homogeneous tube using a proper bluntness. The presented formulas quickly converge and can be implemented in optimization programs.
similar resources
non-corrective approach to pronunciation
the aim of this study has been to find answers for the following questions: 1. what is the effect of immediate correction on students pronunciation errors? 2. what would be the effect of teaching the more rgular patterns of english pronunciation? 3. is there any significant difference between the two methods of dealing with pronuciation errore, i. e., correction and the teaching of the regular ...
15 صفحه اولOptimalization of Die Shap and Flow Lines in Non-Linear Dies in Extrusion of Non-Circular Sections
In this paper, an analytical method for noncircular shape extrusion is presented. Using this method, non-linear deformation field can be described with Hermit cubic spline which is prescribed by the boundary conditions of the die at its entryand exit. The upper bound method has been used to obtain optimum coefficient of the tangential boundary conditions. The results show that the optimum tange...
full textOptimalization of Die Shap and Flow Lines in Non-Linear Dies in Extrusion of Non-Circular Sections
In this paper, an analytical method for noncircular shape extrusion is presented. Using this method, non-linear deformation field can be described with Hermit cubic spline which is prescribed by the boundary conditions of the die at its entryand exit. The upper bound method has been used to obtain optimum coefficient of the tangential boundary conditions. The results show that the optimum tange...
full textOrigami tubes with reconfigurable polygonal cross-sections.
Thin sheets can be assembled into origami tubes to create a variety of deployable, reconfigurable and mechanistically unique three-dimensional structures. We introduce and explore origami tubes with polygonal, translational symmetric cross-sections that can reconfigure into numerous geometries. The tubular structures satisfy the mathematical definitions for flat and rigid foldability, meaning t...
full textFree Vibration Analysis of Non-Uniform Circular Nanoplate
In this paper, axisymmetric free vibration analysis of a circular Nano-plate having variable thickness was studied. The variation in thickness of plate was considered as a linearly in radial direction. Nonlocal elasticity theory was utilized to take into account size-dependent effects. Ritz functions was utilized to obtain the frequency equations for simply supported and clamped boundary. To ve...
full textMy Resources
Journal title
volume 25 issue 3
pages 277- 288
publication date 2012-07-01
By following a journal you will be notified via email when a new issue of this journal is published.
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023