Investigation of Thermal Operational Regimes for Diamond Bit Drilling Operations (TECHNICAL NOTE)
Authors
Abstract:
This paper reviews existing studies and investigates thermal operational regimes of diamond bit during drilling operations. The operating temperature of the diamond core drill is studied under bench condition and an optimal thermal range are presented. Based on this study, it was noted that glazing of diamond tools is observed at temperatures less than 327°C, and normal wear of diamond tools is observed at temperatures within the range of 327- 660°C. Burning-in of diamond cores is accompanied by heating the matrix to temperatures above 800°C.
similar resources
An Investigation on the Causes of a Rotor Bending and its Thermal Straightening (TECHNICAL NOTE)
Distortion or bend in a turbine rotor (especially HIP rotors) may be caused by a number of factors, either singularly or in combination. In general, the causes of rotor bend can be classified invariably in two categories: Rapidly forming permanent rotor bends and/or Slower forming rotor bends, which could trip the turbines’ emergency stop. One of the major modifying solutions for rapid repairin...
full textDrilling Mechanism Investigation on SiC Ceramic Using Diamond Bits
Results and Conclusions: The results show that, brittle fracture is the dominant way for SiC ceramic’s removal mechanism, plastic deformation always exists during the drilling process. Brittle fracture includes cleavage fracture, transgranular fracture, intergranular fracture, material peeling off and grain boundary breakage; resintering and recrystallization happen under the joint action of gr...
full textinvestigation of thermal comfort properties of woven sport fabric using blend of estabragh fibers
امروزه لباس در نظر ورزشکاران و کسانی که برای اوقات فراغت خود و یا برای رسیدن به اندامی متعادل، ورزش می کنند؛ بسیار با اهمیت است. احساس مطلوب از لباس در زمره خصوصیات راحتی پوشش می باشد. خصوصیات انتقال رطوبت لباس، در ارزیابی راحتی حسی و حرارتی منسوجات تولید شده از آن ها بسیار مهم است. هدف از این تحقیق، معرفی پارچه جدید است که متشکل از الیاف استبرق با خواص منحصر به فرد می باشد. استبرق لیف طبیعی تو...
Penetration rate prediction for diamond bit drilling by adaptive neuro-fuzzy inference system and multiple regressions
a r t i c l e i n f o In many mining, civil, and petroleum engineering applications diamond bit drilling is widely used due to high penetration rate, core recovery and its ability to drill with less deviation. Recently, many research have been conducted to estimate the penetration rate of diamond drilling which can be considered as one of the most important parameters in project planning and co...
full textInvestigation of Correlations between Seismic Parameters and Damage Indices for Earthquakes of Iran Region (TECHNICAL NOTE)
Seismic record of an earthquake contains important and significant data about characteristics of a ground motion. In this study, interdependencies between important seismic parameters and three overall structural damage indices including the Bracci index, the modified flexural damage ratio (MFDR) index and the drift index were determined for several records of earthquakes occurred in the Iran. ...
full textInvestigation of a Powerful Tool for the Development of Thinly Bedded Carbonate Reservoirs (TECHNICAL NOTE)
In thin-layered reservoirs, drilling engineers face tough challenges—planning their drilling programs to follow the most productive reservoir layers while avoiding nearby water, gas or high-pressure zones. The rewards for a successful drilling strategy are clear—increased oil production and reduced water cut. In an oil field in the Persian Gulf, for example, oil production was increased four- t...
full textMy Resources
Journal title
volume 32 issue 5
pages 790- 793
publication date 2019-05-01
By following a journal you will be notified via email when a new issue of this journal is published.
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023