A Modified Phase-Shifted Pulse Width Modulation to Extend Linear Operation of Hybrid Modular Multi-level Converter
Authors
Abstract:
Recently, hybrid modular multi-level converters, which are configured as full and half bridge sub-modules, are developed and utilized in the wide area of applications. Compared to its non-hybrid counterpart, these converters have several advantages such as the ability to nullify the DC side fault current and controlling AC side reactive power during the faults. This paper proposes a modified phase shifted PWM method (PS-PWM) which uses a combination of an improved PS-PWM with cancelled mismatch pulses and a third harmonic injection method. The proposed method not only reduces output voltage harmonic content and uneven loss distribution between sub-modules but also extends the linear operating range of the inverter, which improves the DC bus utilization. The mathematical analysis is derived for the proposed method and in order to study the efficiency of the system using the proposed method, the loss calculation has been done and compared with traditional PS-PWM method. Simulation results in Matlab/Simulink show the suitable performance of the presented scheme.
similar resources
Operation Modes of a Secondary-Side Phase-Shifted Resonant Converter
Abstract: In this work, a unidirectional full-bridge resonant converter with secondary-side phase-shifted control is addressed. With the variation of voltage gain and power level, this converter may enter into different operational modes, including three continuous current modes and one discontinuous current mode. The details in each operation mode are discussed one by one. The boundary conditi...
full textDesign and Performance Analysis of 7-Level Diode Clamped Multilevel Inverter Using Modified Space Vector Pulse Width Modulation Techniques
In this paper, a 7-level Diode Clamped Multilevel Inverter (DCMLI) is simulated with three different carrier PWM techniques. Here, Carrier based Sinusoidal Pulse Width Modulation (SPWM), Third Harmonic Injected Pulse Width Modulation (THIPWM) and Modified Carrier-Based Space Vector Pulse Width Modulation (SVPWM) are used as modulation strategies. These modulation strategies include Phase Dispos...
full textPulse width modulation for multi-agent systems
This paper studies the consensus problem for multi-agent systems. A distributed consensus algorithm is developed by constructing homogeneous pulse width modulators for agents in the network. In particular, a certain percentage of the sampling period named duty cycle is modulated according to some state difference with respect to the neighbors at each sampling instant. During each duty cycle, th...
full textThree-level zero-voltage switching pulse-width modulation DC–DC boost converter with active clamping
DC–DC step-up converters for high-output voltage applications typically demand high voltage devices, leading to high conduction and switching losses. This identified demand has motivated research on active clamping and multi-level topologies. On this context, this study presents the study of a novel DC–DC boost converter with three-level boost-type active clamping, zero-voltage switching (ZVS) ...
full textSpace Vector Pulse Width Modulation of Three-Level Inverter Extending Operation Into Overmodulation Region
Multilevel voltage-fed inverters with space vector pulse width modulation have established their importance in high power high performance industrial drive applications. The paper proposes an overmodulation strategy of space vector PWM of a three-level inverter with linear transfer characteristic that easily extends from the undermodulation strategy previously developed by the authors for neura...
full textApplication of Sinusoidal Pulse Width Modulation Based Matrix Converter as Revolutionized Power Electronic Converter
This Paper presents the application of Single Phase Matrix converter as a Cycloconverter and Cycloinverter. Sinusoidal Pulse Width Modulation (SPWM) technique is used to generate control pulses for the Matrix Converter switches to produce output. The switching sequences for the Matrix Converter to operate as Cycloconverter and Cycloinverter are presented and evaluated using MATLAB/ Simulink. Th...
full textMy Resources
Journal title
volume 6 issue 2
pages 183- 192
publication date 2018-12-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023