effect of energy drinks on discoloration of silorane- and dimethacrylate-based composite resins
نویسندگان
چکیده
objectives: this study aimed to assess the effects of two energy drinks on color change (∆e) of two methacrylate-based and a silorane-based composite resin after one week and one month. materials and methods: thirty cubic samples were fabricated from filtek p90, filtek z250 and filtek z350xt composite resins. all the specimens were stored in distilled water at 37°c for 24 hours. baseline color values (l*a*b*) of each specimen were measured using a spectrophotometer according to the ciel*a*b* color system. ten randomly selected specimens from each composite were then immersed in the two energy drinks (hype, red bull) and artificial saliva (control) for one week and one month. color was re-assessed after each storage period and ∆e values were calculated. the data were analyzed using the kruskal wallis and mann–whitney u tests. results: filtek z250 composite showed the highest ∆e irrespective of the solutions at both time points. after seven days and one month, the lowest ∆e values were observed in filtek z350xt and filtek p90 composites immersed in artificial saliva, respectively. the ∆e values of filtek z250 and z350xt composites induced by red bull and hype energy drinks were not significantly different. discoloration of filtek p90 was higher in red bull energy drink at both time points. conclusions: prolonged immersion time in all three solutions increased ∆e values of all composites. however, the ∆e values were within the clinically acceptable range (<3.3) at both time points.
منابع مشابه
Effect of Energy Drinks on Discoloration of Silorane and Dimethacrylate-Based Composite Resins
OBJECTIVES This study aimed to assess the effects of two energy drinks on color change (ΔE) of two methacrylate-based and a silorane-based composite resin after one week and one month. MATERIALS AND METHODS Thirty cubic samples were fabricated from Filtek P90, Filtek Z250 and Filtek Z350XT composite resins. All the specimens were stored in distilled water at 37°C for 24 hours. Baseline color ...
متن کاملEffect of energy drinks on microhardness of silorane and dimethacrylate-based composite resins
Introduction: Increased consumption of energy drinks has raised concerns about their effects on dental restorations. This study assessed the effects of two energy drinks on the surface microhardness of methacrylate and silorane-based composites after 1-week and 1-month periods. Materials & Methods: In this in-vitro study, 90 cubic samples were prepared from Filtek P90, Filtek Z250 and Filtek Z...
متن کاملThe effect of bleaching on microhardness of silorane-based composite resins
Introduction: Bleaching treatments may negatively affect the surface quality of composite restorations existing in the mouth. This study sought to assess the effect of 16% and 35% carbamide peroxide on microhardness of silorane-based versus two methacrylate-based composite resins. Methods: A total of 54 discs were fabricated from FiltekP90 (P90), FiltekZ350XT(Z350) Enamel and Filtek Z250(Z25...
متن کاملThe effect of repeated preheating of dimethacrylate and silorane-based composite resins on marginal gap of class V restorations
Background. One of the problems with composite resin restorations is gap formation at resin‒tooth interface. The present study evaluated the effect of preheating cycles of silorane- and dimethacrylate-based composite resins on gap formation at the gingival margins of Class V restorations. Methods. In this in vitro study, standard Class V cavities were prepared on the buccal surfaces of 48 bovin...
متن کاملEffect of composite shade, curing time and mode on temperature rise of silorane and methacrylate- based composite resins
Introduction: The present study was performed to evaluate the effects of light-curing modes and shades of methacrylate and silorane-based composite resins on temperature rise during polymerization of composite resins. Materials &Methods: In this in vitro study, ninety composite samples with two types of composite resin - methacrylate-based and a low-shrinkage silorane-based were prepared, in...
متن کاملEffectiveness of Silorane-based Composite as a Repair Filling for Dimethacrylate- or Silorane-based Composite Restorations
Objective: This study aimed to evaluate the suitability of one specific silorane-based composite for the application as a repair material for different substrates. Materials and methods: Truncated cones of composites fabricated and thermocycled for 6000 cycles to serve as a substrate were made of two commercially available dimethacrylate-based composites (DBC) (Filtek Supreme and Clearfil APX) ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
journal of dentistry, tehran university of medical sciencesجلد ۱۳، شماره ۴، صفحات ۲۶۱-۲۷۰
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023