service life prediction of silica fume concretes
نویسندگان
چکیده
deterioration of concrete structures in the gulf region is a serious problem. penetration of chloride ion into concrete is responsible for such early deterioration. determination of chloride diffusion coefficient is an effective way to predict the service life of concrete structures. in order to investigate the performance of concrete mixtures in such environments, ordinary and silica fume concrete mixtures containing various water to cementitious materials ratios were used. rapid chloride permeability test and determination of diffusion coefficient of chloride ion penetration in accordance with bulk diffusion test under laboratory conditons simulated to persian gulf climate, and site investigation were performed. concentration of chloride ions in various depths of concrete specimens was measured using acid soluble chloride test method. test results show that silica fume reduces the chloride penetration and the diffusion coefficient in concrete mixtures. different models were made for rapid chloride test results, and diffusion coefficient, of concretes maintained in the hot and corrosive environments of the persian gulf. the models which were calibrated with real data obtained from the concrete structures are capable to predict the penetration and service life of concrete structures in such corrosive environments.
منابع مشابه
Influence of (SBR) Latex and Silica Fume on Properties and Performance of Cement - based Repair Concretes
متن کامل
Influence of (SBR) Latex and Silica Fume on Properties and Performance of Cement - based Repair Concretes
متن کامل
prediction compressive strength of concretes containing silica fume and styrene-butadiene rubber (sbr) with a mathematical model
this paper deals with the interfacial effects of silica fume (sf) and styrene-butadiene polymer (sbr) on compressive strength of concrete. analyzing the compressive strength results of 32 concrete mixes performed over two water-binder ratios (0.35, 0.45), four percentages replacement of silica fume (0%, 5%, 7.5%, 10%) and four percentages of sbr (0%, 5%, 10%, 15%) were investigated. a mathemati...
متن کاملImproving the workability and strength of silica fume concrete by using silane-treated silica fume
Mortar with high workability even without a water-reducing agent and with high tensile and compressive strengths (3.1 and 78 MPa, respectively) was obtained by using as an admixture silica fume that had been surface treated with a silane coupling agent. The treatment enhanced the wettability of silica fume by water, thereby increasing the workability of the mortar mix. It also enhanced the bond...
متن کاملEffect of Hydrochloric Acid (HCl) on Blended Cement (Fly Ash based) and Silica Fume Blended Cement and their Concretes
This paper presents the effect of Hydrochloric acid (HCl) on Blended Cement (Fly ash based(BC)) and Silica Fume Blended Cement(SFBC) and their concretes. The BC and SFBC and their concretes BCC and SFBCC produced with HCl dosage of 100, 150, 300, 500 and 900 mg/l added in deionised water. In addition to this control specimens were prepared with deionised water (without HCl) for comparison. The ...
متن کاملEffects of Silica Fume in Conventional Concrete
The production of tailor made high strength and high performance concrete are made by incorporating silica fume into the normal concrete and it is a routine one in the present days. The mix proportioning is intricate and the design parameters are increased due to the incorporation of silica fume in conventional concrete. The aim of this paper is to look into the different mechanical properties ...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
international journal of civil engineeringجلد ۵، شماره ۳، صفحات ۱۸۲-۱۹۷
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023