نتایج جستجو برای: zirconium powder metallurgy

تعداد نتایج: 55153  

2012
Goutam Dutta Dipankar Bose

The residual porosity is an unavoidable phenomenon of the components produced by powder metallurgy process which in turn largely affects the strength property of the same. Now a day it is possible to control porosity of powder metallurgy components and retain them to desired amount when required. The porosity of a powder metallurgy component is greatly depends on the sintering temperature. In t...

Journal: :Dalton transactions 2010
Stephane Lemonnier Stephane Grandjean Anne-Charlotte Robisson Jean-Pierre Jolivet

Recent concepts for nuclear fuel and targets for transmuting long-lived radionuclides (minor actinides) and for the development of innovative Gen-IV nuclear fuel cycles imply fabricating host phases for actinide or mixed actinide compounds. Cubic stabilized zirconia (Zr, Y, Am)O(2-x) is one of the mixed phases tested in transmutation experiments. Wet chemical routes as an alternative to the pow...

پایان نامه :وزارت علوم، تحقیقات و فناوری - دانشگاه علم و صنعت ایران - دانشکده مهندسی مواد 1386

در این پروژه، مباحث مربوط به ریخته گری دوغابی یکی از مهمترین سرامیکهای اکسیدی به نام زیرکونیا، مورد بررسی قرار گرفته است. زیرکونیای پایدار شده با ایتریا به عنوان ماده اولیه انتخاب گردیده است. در این باره، بررسی اثر افزودن زیرکونیای پایدار شده جزئی بر زیرکونیای کامل پایدار شده با ایتریا و اثر ph و درصد روانساز و خواص رئولوژی دوغابهای حاصل شده و اثر ترکیب بر خواص مکانیکی شامل، استحکام شکست، ktc و...

Journal: :Journal of Chemical Education 1956

Journal: :Journal of oral rehabilitation 1976
R A Fuys R G Craig K Asger

The physical and mechanical properties of samples of a nickel-base alloy fabricated by powder metallurgy were determined. The particle sizes of the powders used to make the samples varied from -80/ +200 mesh to -325 mesh. The compaction pressure varied from 138 to 414 MN/m2 and the sintering temperature varied from 1150 to 1250 degrees C. The shrinkage during processing, the porosity, tensile s...

Journal: :Nature 1961

2018
Yan Zhao Di Chen Dekai Li Jingguang Peng Biao Yan

In recent years, the rolling densification process has become increasingly widely used to strengthen powder metallurgy parts. The original composition of the rolled powder metallurgy blank has a significant effect on the rolling densification technology. The present work investigated the effects of different carbon contents (0 wt. %, 0.2 wt. %, 0.45 wt. %, and 0.8 wt. %) on the rolling densific...

2017
Liang Xu Yanping Xiao Qian Xu Qiushi Song Yongxiang Yang

1 School of Metallurgy, Northeastern University, Shenyang 110004, China 2 State Key Laboratory of Advanced Special Steel, Shanghai University, Shanghai 200072, China 3 School of Metallurgical Engineering, Anhui University of Technology, Ma’anshan 243002, China 4 Department of Materials Science and Engineering, Delft University of Technology, 2628 CD Delft, The Netherlands * E-mail: [email protected]...

2012
C. Sharma

In this paper an attempt has been made to correlate the usefulness of electrodes made through powder metallurgy (PM) in comparison with conventional copper electrode during electric discharge machining. Experimental results are presented on electric discharge machining of AISI D2 steel in kerosene with copper tungsten (30% Cu and 70% W) tool electrode made through powder metallurgy (PM) techniq...

نمودار تعداد نتایج جستجو در هر سال

با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید