OBJECTIVES In this in vitro study, the effect of various drying (surface reaction) times of a commercial silane, other than that recommended by the manufacturer (at least 5 min), on the bond strength between the resin composite and silica coated base and noble alloys was evaluated. METHODS A total of 112 disc specimens (9 mm diameter and 0.5 mm thickness) were cast out of two types of alloy d...

Our knowledge on the bonding mechanisms between the metal and ceramic parts of dental systems is very limited. This work tested the hypothesis that the details of the interface processes can be described in the framework of a chemical diffusion model. The development of interfacial phases was investigated by cross-sectional analytical transmission electron microscopy between a NiCr (Wiron 99) a...

The aim of this study was to obtain the 3-D qualitative and quantitative nanoscale data of the surface topography and surface roughness of glazed and unglazed feldspathic ceramics. Twelve samples composed of Ni-Cr alloy (Wiron 99, Bego Germany) and feldspathic ceramics (IPS Classic, Ivoclar-Vivadent, Schaan, Liechtenstein) were prepared, and divided into two groups, dependent of the surface fin...

The purpose of this study was to compare the effect of casting temperature and atmosphere on the castability of three Ni-Cr alloys against direct flame casting method. Vera Bond (VB), Vera Bond 2 (VB2) and Wiron 99 (W99) were cast at three temperatures: VB and VB2 (1310 °C, 1340 °C and 1370 °C); W99 (1400 °C, 1430 °C and 1460 °C) in atmosphere, vacuum and direct flame. Each alloy was cast in se...

The aim of this study was to evaluate the influence of microstructure and composition of basic alloys on their microshear bond strength (µSBS) to resin luting cement. The alloys used were: Supreme Cast-V (SC), Tilite Star (TS), Wiron 99 (W9), VeraBond II (VBII), VeraBond (VB), Remanium (RM) and IPS d.SIGN 30 (IPS). Five wax patterns (13 mm in diameter and 4mm height) were invested, and cast in ...

BACKGROUND/AIM Metal-ceramic bond strength and alloys' elastic modulus clearly determine the potential of alloy application, because the ceramic integrity during mastication depends on these two characteristics. The aim of this study was to evaluate metal-ceramic bond strenght and elastic modulus of cobalt-chromium alloys in making porcelain-fused-to-metal restorations, regarding the applicatio...

Aleksandra ČAIROVIĆ Faculty of Dental Medicine University of Belgrade Clinic for Prosthodontics Rankeova 4, 11000 Belgrade Serbia [email protected] SUMMARY Introduction Increases in market prices of gold over the last 20 years have led to expansion of basic dental alloys, which, primarily due to their good mechanical properties and acceptable prices, have found their place in everyday...

AIM The objective of this study is to investigate the effect of different luting agents on the fracture strength of Turkom-Cera all-ceramic copings. METHODS AND MATERIALS Standardized metal dies were duplicated from a prepared maxillary first premolar tooth using non-precious metal alloy (Wiron 99). Thirty Turkom-Cera copings of 0.6 mm thickness were then fabricated. Three types of luting age...

In this paper the benchmark dose (BMD) method was introduced for spontaneous behavior data observed in 2-, 5-, and 8-month-old male and female C57Bl mice exposed orally on postnatal day 10 to different doses of 2,2',4,4',5-pentabromodiphenyl ether (PBDE 99). Spontaneous behavior (locomotion, rearing, and total activity) was in the present work quantified in terms of a fractional response define...