thermal barrier coatings (tbcs) are used to provide thermal insulation to the hot section components of gas turbines in order to enhance the operating temperature and turbine efficiency. hot corrosion and thermal shocks are the main destructive factors in tbcs which comes as a result of oxygen and molten salt diffusion into the coating. in this thesis atmospheric plasma spraying was used to dep...

in this thesis protic and aprotic ammonium-based ionic liquids were synthesized and their surface tensions were measured in the range of 298-373k. the protics are alkyl ammonium-based ils with the carboxylate (formate, acetate, propionate) anion and aprotics are quaternary ammonium-based ils with bis(trifluoromethylsulfonyl)imide anion. capillary rise method was used for surface tension measure...

in this thesis, barium ferrite nano particles were prepared by sol-gel method. their structural and magnetic properties of samples have been investigated using thermo gravimetric analysis (tg-dta), x-ray powder diffractometer (xrd), fourier transform infrared (ftir), scanning electron microscopy (sem), field emission scanning electron microscopy (fesem), ac susceptometer, vibrating sample magne...

drought is transient phenomenon , slow , repetitive and integral part of the climate of each region. drought begins with a substantial reduction in precipitation over the long-term average rainfall and over time, reduced soil moisture and surface and ground water resources will continue to decrease. this phenomenon is the most important in bakhtegan basin because of its importance in strategic ...

run-out-table (rot) is located between last finishing stand and down coiler in a hot strip mill. as the hot steel strip passes from rot, water jets impact on it from top and bottom and strip temperature decreases approximately from 800-950 °c to 500-750°c. the temperature history that strip experience while passing through rot affects significantly the metallurgical and mechanical properties, s...

any change in the refractive index of a laser active medium can lead to serious degradation of beam quality, laser beam modes, laser performance and variation in the intensity distribution. alteration in the refractive index of laser active medium is especially notable in high power lasers. it is clear that in the laser beam production, the pumping agent induces a great amount of heat which...

burnout is a response to the chronic work stress which is prevalent mostly among the people who do people job, like teaching. the purpose of this study was to develop a valid and reliable instrument that can measure burnout in foreign language teachers. although some widely used instruments were developed before which measured burnout in teachers, a specific instrument which include specific sy...

126 abstract: in this research we studied the effects of cyclic hydration and dehydration of cysts of artemia urmiana and artemia parthenogenetica on the hatching percentage, survival and growth. the experiment was carried out in 3 treatments (1-3 hydration/dehydration cycles) with 3 replicates for each treatment. later effects of cold preservation at -20°c during three time periods were ...

in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...