apart from regular wheel wear such as decreasing wheel diameters and reduced flange thicknesses and heights, wheel flats (wf) and oval wheels (or oor, out-of-roundness) are the most common wheelset problems for railway vehicles. within the fp7 research project “saferail”, apt has developed an innovative wheelset monitoring system so-called “wheel flat and out of roundness monitoring (worm) syst...

The wheelset bearing play an important role in train running safety. In this paper, we introduce the nonlinear dynamical method to study the wheelset bearing vibration signal. Based on the comparative studies of the phase graph and the correlation dimension of the vibration signals under normal condition, outer peeling fault condition and rolling element electric erosion fault condition, the fo...

Aerodynamic noise becomes significant for high-speed trains and its prediction in an industrial context is hard to achieve. The aerodynamic and aeroacoustic behaviour of the flow past a highspeed train wheelset, one of the main components of a bogie, are investigated at a scale 1:10 using a two-stage hybrid method of computational fluid dynamics and acoustic analogy. The near-field unsteady flo...

This paper presents a study of state estimation for active steering of profiled wheels. Fundamental characteristics of a solid-axle wheelset are explained and the potential benefits of active steering are discussed. The paper studies the non-linearity of the wheelset caused by profiled wheel-rail contact surfaces and develops a recursive non-linear Kalman filter to provide reliable and accurate...

This paper deals with the interaction between a moving wheelset and a slab track due to the shortpitch corrugated rail. The wheelset is modeled using a free-free Timoshenko beam with attached rigid bodies as the axle boxes, wheels and brake discs. The slab track model consists of elastically supported double EulerBernoulli beams. In fact, both wheelset and slab track are symmetric structures an...

Apart from regular wheel wear such as decreasing wheel diameters and reduced flange thicknesses and heights, wheel flats (WF) and oval wheels (or OOR, Out-Of-Roundness) are the most common wheelset problems for railway vehicles. Within the FP7 Research Project “Saferail”, APT has developed an innovative wheelset monitoring system so-called “Wheel flat and Out of Roundness Monitoring (WORM) syst...

this paper studies the key issue of fault tolerance for actively controlled railway wheelsets. It assesses failure modes in such systems, with a focus on actuator failures, and consequence of those hardware failures. It seeks to establish the necessary basis for control reconfiguration to ensure system stability and performance in the event of a faulty, without the need for hardware redundancie...

Abstract. This article attempts to analyze the Hopf bifurcation behavior of a railway wheelset in the presence of dead-zone and yaw damper nonlinearities. A model that is more precise than Yang and Ahmadian is investigated. Using Bogoliubov-Mitropolsky averaging method and critical speed, the amplitude of the limit cycle in the presence of the mentioned nonlinearities is taken into consideratio...

in this paper the effects of non-linearity of suspension on dynamic behavior of a railway wheelset has been studied. this wheelset has four degrees of freedom that with two constraints it has reduced to two degrees of freedom. vermeulen-johnson theory has been used to calculate contact forces between wheel and rail. in this study the creep coefficients have considered constant. any linearizatio...