optimal use of water resources is essential to decrease cost and maximize available water resources. subsurface drip irrigation can increase irrigation and water use efficiency. this irrigation method distributes water into the soil, leaving the surface of the soil dry and decreasing evaporation. in the design of subsurface drip irrigation (sdi) systems, the dimensions of the wetted onion deter...

in this study, effect of slope on soil wetting pattern under surface drip irrigation and simulation with hydrus-2d model evaluated.the physical model made of plexiglas to size 83, 6 and 54 cm (length, width, height) filled with silty clay loam soil was used. to achieve the desired discharge, a small drip irrigation system created that includes a water tank with a fixed height (about 2 meters), ...

designing and scheduling of drip irrigation systems are often done without enough information about water distribution in the soil. due to tillage operations and crop production practices, agricultural soils can be considered as two layered soils with different bulk densities. the top soil layer has a lighter texture than the sub soil layer. in this research, the development of the wetting fron...

The initial soil water content affects wetting front instability. A series of experiments were conducted where water was infiltrated into a 20/30 sand with initial volumetric water contents of 0, 0.005, 0.01, 0.015, 0.02, 0.03, 0.04 and 0.047 cm/cm. Both water content and matric potential were measured. Water content was measured with Synchrotron X-rays at the Cornell High Energy Synchrotron So...

This communication reports strongly anisotropic wetting behavior on one-dimensional nanopatterned surfaces. Contact angles, degree of anisotropy, and droplet distortion are measured on micro- and nanopatterned surfaces fabricated with interference lithography. Both the degree of anisotropy and the droplet distortion are extremely high as compared with previous reports because of the well-define...