abstract – aluminium 7075- t651 alloys are widely used in the production of light weight structures requiring a high strength to weight ratio and high corrosion resistance. the effect of processing parameters on fatigue life of 7075- t651 aluminium joints produced by friction stir welding was investigated in the present study. welding samples were made by employing rotating tool speed of 770, 9...

In this study, the effect of various welding parameters on the weldability of Mild Steel specimens having dimensions 50mm× 40mm× 6 mm welded by metal arc welding were investigated. The welding current, arc voltage, welding speed, heat input rate are chosen as welding parameters. The depth of penetrations were measured for each specimen after the welding operation on closed butt joint and the ef...

Welding speed and rotational speed have been singled out as the most influential welding parameters which affect the tensile strength as well as the hardness in Friction Stir Welding (FSW). It is however problematic to determine the possible welding speed and rotational speed given the Ultimate Tensile Strength (UTS) since there are several combinations of welding speeds and rotational speeds t...

A prototype of autonomous mobile robot with two vision sensors for automatic welding of steel plates was constructed. The robot can move straight, steer and turn around the robot center by controlling the driving speed of the two wheels respectively. At the tip of the movable arm, two CCD cameras are fixed. A local camera observes the welding line near the welding torch and another wide camera ...

Friction stir lap welding of 7B04 aluminum alloy was conducted in the present paper, and the effect of welding speed on the defect features and mechanical performance of lap joints was investigated. The results indicate that the hook defect at the advancing side (AS) can reduce the effective thickness of the top sheet, and the sheet thinning level is gradually lowered by increasing the welding ...

The ethernet technology is used in multi-arc submerged arc welding systems communicate with each other. The structure of twin-arc high-speed SAW (Submerged arc welding) equipments based on Ethernet is proposed. The welding equipment technical requirement for Ethernet is discussed. The crucial implementations of Ethernet TCP / IP in the welding equipment is presented including designs of ARM (Ad...

Submerged arc welding is preferred over other methods of welding because of its inherent qualities like easy control of process variables, high quality, deep penetration, smooth finish, capability to weld thicker sections. Since the development of submerged arc welding process, welding engineers are striving for reduction in welding cost without compromise in the performance of the weld. Flux u...

This study aims to calculate the resistance spot welding current digitally at a fast speed. The conventional open-loop spot welding machine cannot measure the current, thus the welding quality varies. The welding time of spot welder is very short, but the welding current is strong and it is hard to be measured, thereby resulting in the uncontrollability of welding quality. This study uses a hig...