Gas tungsten arc welding (GTAW) or Tungsten inert gas welding (TIG) is one of the widely used techniques for joining ferrous and non-ferrous metal.Gas tungsten arc welding process,consist of non-consumable tungsten electrode which is used to provide the arc for welding. During the welding cycle a shield of inert gas expels the air from the welding area and prevents oxidation of the electrode, w...

A new spectroscopic parameter is used in this paper for on-line arc-welding quality monitoring. Plasma spectroscopy applied to welding diagnostics has typically relied on the estimation of the plasma electronic temperature, as there is a known correlation between this parameter and the quality of the seams. However, the practical use of this parameter gives rise to some uncertainties that could...

Welding is a manufacturing process, which is carried out for joining of metals by Metal Inert Gas (MIG) welding. This is the one types of Gas Metal Arc Welding (GMAW), in which Argon and Helium is used as a inert gas. Shielding gas Argon and Helium is used and consumable electrode is used which also plays role of conductor. MIG welding is versatile, gives very little loss of alloying elements a...

Correct detection of input and output parameters of a welding process is significant for successful development of an automated welding operation. In welding process literature, we observe that output parameters are predicted according to given input parameters. As a new approach to previous efforts, this paper presents a new modeling approach on prediction and classification of welding paramet...

ABSTRACT: The solving method of positions and attitudes of discrete solder joints in a curved weld and the method for constructing a weld coordinate system based on Frenet-Serret’s vector were put forward and the position and orientation vectors relative to time series of discrete welding points were obtained. Thus the relative position and orientation between welding point and welding torch wi...

Electron beam welding (EBW) shows certain problems with the control of focus regime. The electron beam focus can be controlled in electron-beam welding based on the parameters of a secondary signal. In this case, the parameters like secondary emissions and focus coil current have extreme relationships. There are two values of focus coil current which provide equal value signal parameters. There...

in this paper, the deep drawing process of tailor welded blanks is simulated using the finite element modelling and verified using the experimental results available in the literature. then the effect of die and material properties on the welding line movement is investigated. it is seen that the most effective material parameters on weld line movement are different between sheet metal thicknes...

In general, it is desirable to finish the weld quickly, before a large volume of surrounding metal heats up and expands. The welding process used, type, welding current and speed of travel, thus, affect the degree of shrinkage and distortion of a weldment. The use of mechanized welding equipment reduces welding time, metal affected zone and consequently distortion. This article helps to define ...

The MIG welding is one of the most popular welding techniques used in industries. This uses a consumable metal electrode. The input parameters in MIG welding play a significant role in deciding the weld quality, strength, cost and speed. Most of times manufacturer faces a problem to select optimum process parameters for a good quality weld. This paper tries to present the effect of different we...