in this paper, dissimilar resistance spot welding of aisi 1075 eutectoid steel to aisi 201 stainless steel is investigated experimentally. for this purpose, the experiments are designed using response surface methodology and based on four-factor, five-level central composite design. the effects of process parameters such as welding current, welding time, cooling time and electrode force are inv...

Spot welding is used extensively in the automotive industry. The quality of an individual welding spot is a major concern due to the heavy reliance on their use in the manufacture of cars. The main parameters that control the quality of a welding spot are current, voltage, welding force, welding time, and the quality of the welding electrodes. The condition of the welding electrodes plays a maj...

The aim of the present work was to study the effect of various process parameters i.e. current, voltage, travel speed, electrode diameter, flux composition, pre heating of workpiece, electrode stick-out and edge including angle on changes in tensile strength and toughness of the weld bead geometry of HSLA Steel and to optimize the process so that minimal changes occur in the material properties...

Gas tungsten arc welding (GTAW) or Tungsten inert gas welding (TIG) is one of the widely used techniques for joining ferrous and non-ferrous metal.Gas tungsten arc welding process,consist of non-consumable tungsten electrode which is used to provide the arc for welding. During the welding cycle a shield of inert gas expels the air from the welding area and prevents oxidation of the electrode, w...

This paper develops an automatic welding control scheme for alternating current shielded metal arc welding (SMAW) system. A mathematical model of the welding control system is derived and the system parameters identified. An adaptive sliding mode controller is designed to estimate the bound of the system uncertainties and to modulate the electrode feed rate in such a way that the desired arc le...

The information system is a coherently structured assembly, made of electronic computing and communication equipments, software, processes, automated and manual procedures, used as automatic data processing tool within a field of activity. In the process of welding in shielding gas environment with fusible electrode, there are used either inert or active gases. Therefore, we make the distinctio...

MAY 2003 -S 116 ABSTRACT. Mechanical characteristics of resistance spot welding machines, such as stiffness, friction, and moving mass, have complex influences on the resistance welding process and weld quality. In this paper, these influences are systematically investigated through experiments. The mechanisms of the influences are explored by analyzing process signatures, such as welding force...

HUNDREDS OF THOUSANDS of people work in welding, cutting and brazing. It is estimated that welders compose 1 to 2% of the U.S. working population, including a significant segment of the aging workforce. According to OSHA’s Christine Petitti, the most commonly used welding processes are: 1) Flux-cored arc welding (FCAW). This process uses an arc between a continuous filler metal electrode and th...

Double-Electrode Gas Metal Arc Welding (DE-GMAW) is a novel welding process recently developed to increase welding productivity while maintaining the base metal heat input at a desired low level. In this paper, the DE-GMAW process was improved by replacing its non-consumable tungsten electrode with a consumable welding wire electrode resulting in a new process called consumable DE-GMAW. To unde...

Occupational asthma (OA) can be induced by fumes of manual metal-arc welding on stainless steel. In recent years, the use of special stainless steels (SSS) with high chromium content has increased. This study presents two cases of OA caused by manual metal-arc welding on SSS. In both cases, the diagnosis of OA was based on respiratory symptoms, occupational exposure and positive findings in the...