Ill EXECUTIVE SUMMARY IV

I. Abstract: The prediction of the optimal weld bead width is an important aspect in shielded metal arc welding (SMAW) process as it is related to the strength of the weld. This paper focuses on investigation of the development of the simple and accurate model for prediction of weld bead width of butt joint of SMAW process. Artificial neural networks technique was used to train a program in C++...

Welding is a very complex process in which the final weld quality can be affected by many process parameters. In order to inspect the weld quality and detect the presence of various weld defects, different methods and systems are studied and developed. In this paper, a laser-based vision system is developed for non-destructive weld quality inspection. The vision sensor is designed based on the ...

A simple thermal-mechanical model for friction stir spot welding (FSSW) was developed to obtain similar weld performance for different weld tools. Use of the thermal-mechanical model and a combined approach enabled the design of weld tools for various sizes but similar qualities. Three weld tools for weld radii of 4, 5, and 6 mm were made to join 6061-T6 aluminum sheets. Performance evaluations...

Observation of the weld pool provides an effective path to understand and control the welding process. Observation data also attribute to the validation of numerical models, which helps researchers to analyze and evaluate the welding process. Extensive research has been conducted to provide in situ monitoring of the weld pool. The arc sensor was one of the first few sensors that was adopted for...

This paper develops a vision-based neuro-fuzzy system to control the weld joint penetration in Gas Tungsten Arc Welding (GTAW) of thin sheets. To this end, a camera equipped with a specially designed composite light-filter is used to observe the weld pool from the topside of the workpiece so that comparatively distinct images of the weld pool are obtained. As the Backside weld Width (BW) reflec...

Friction stir welding and tungsten inert gas welding techniques were employed to weld armor grade aluminum alloy to investigate the effect of welding processes on tensile behavior of weld joints. Tensile tests, Vicker microhardness tests and optical microscopy were performed on developed weld joints and base metal. Welding process influenced tensile behavior and microstructure of weld joints. F...

A skilled welder determines the weld joint penetration from his/her observation of the weld pool surface during the welding process. This paper addresses the characterization of the 3D weld pool surface in gas tungsten arc welding (GTAW), i.e., extracting a set of characteristic parameters from the 3D weld pool surface to determine the backside bead width that measures the degree of weld joint ...

Sharma, Saurabh Weld for Itanium Processor (Under the direction of Dr. Thomas M. Conte) This dissertation extends a WELD for Itanium processors. Emre Özer presented WELD architecture in his Ph.D. thesis. WELD integrates multithreading support into an Itanium processor to hide run-time latency effects that cannot be determined by the compiler. Also, it proposes a hardware technique called operat...

Welding input parameters play a very significant role in determining the quality of a weld joint. The joint quality can be defined in terms of properties such as weld-bead geometry, mechanical properties, and distortion. Generally, all welding processes are used with the aim of obtaining a welded joint with the desired weld-bead parameters, excellent mechanical properties with minimum distortio...