Self-heating leads to a temperature rise of the laser diode and limits the output power and efficiency due to increased loss and decreased differential gain. To control device self-heating, it is required to design the laser structure with a low optical loss, while the heat flux must spread out of the device efficiently. In this study, a new asymmetric waveguide design is proposed and th...

Laser diode beam divergence is the main parameter for beam shaping and fiber optic coupling. Increasing the waveguide layer thickness is the conventional method to decrease the beam divergence. In this paper, the broadened asymmetric waveguide is introduced to decrease the divergence without increasing the optical power. The asymmetric waveguide was used to shift the vertical optical field to n...

in this paper, the output power behavior of the wave-guide cw-co2 laser versus efficient parameters of laser performance was investigated. the output power variation versus the discharge current, the pressure and the gas mixture ratio was studied and optimized. the maximum output powers of 6 and 14.5 w were respectively obtained at operating pressures 78 and 50 mbar in two tubes of 3 mm same di...

Due to sensitive and important applications of free-electron laser in industry and medicine, improvement of the power and efficiency of laser has always been emphasized. Therefore, understanding the created field and examining the properties of the field in waveguides with different shapes and studying the sustainability of electrons movement are particularly important. In this study, the beh...

We demonstrate a tunable hybrid Graphene-Nd:YAG cladding waveguide laser exploiting the electro-optic and the Joule heating effects of Graphene. A cladding Nd:YAG waveguide was fabricated by the ion irradiation. The multi-layer graphene were transferred onto the waveguide surface as the saturable absorber to get the Q-switched pulsed laser oscillation in the waveguide. Composing with appropriat...

To enhance lasers’ power and improve their performance, a model wasapplied for the waveguide design of 400 nm InGaN/InGaN semiconductor laser, whichis much easier to implement. The conventional and new laser structures weretheoretically investigated using simulation software PICS3D, which self-consistentlycombines 3D simulation of carrier transport, self-heating, and opt...

Today, electron leakage in InP-based separate confinement laser diode has a serious effect on device performance. Control of electron leakage current is the aim of many studies in semiconductor laser industry. In this study, for the first time, a new asymmetric waveguide structure with n-interlayer for a 1.325 μm InP-based laser diode with InGaAsP multi-quantum well is proposed and theoreticall...

We report the fabrication and performance of the first C-band directly written monolithic waveguide laser (WGL). The WGL device was created in an erbium- and ytterbium-doped phosphate glass host and consisted of an optical waveguide that included a distributed feedback Bragg grating structure. The femtosecond laser direct-write technique was used to create both the waveguide and the waveguide-B...

The method of parallel end-butt coupling has been used to couple GaAs laser diodes to Ta (2)O(5) thin film waveguides. Theoretical caluclations predict that a coupling efficiency into the lowest order waveguide mode of 90% is achievable if the thicknesses of the waveguide (t(g)) and the laser light emitting layer (t(L)) are equal. Experimentally, efficiencies as high as 45.1% have been measured...