Nanofluids, stabilized suspensions of nanoparticles typically < 100 nm in conventional fluids, are evolving as potential enhanced heat transfer fluids due to their better thermal conductivity, increase in single phase heat transfer coefficient and significant increase in critical boiling heat flux. In the present paper, we investigate the overall thermal resistance of a closed two-phase thermos...

To effectively predict the thermal conductivity and viscosity of alumina (Al₂O₃)-water nanofluids, an artificial neural network (ANN) approach was investigated in the present study. Firstly, using a two-step method, four Al₂O₃-water nanofluids were prepared respectively by dispersing different volume fractions (1.31%, 2.72%, 4.25%, and 5.92%) of nanoparticles with the average diameter of 30 nm....

In this study, nanofluids of Chromium (Cr) in water, Ethylene Glycol and Ethanol have been prepared using single step method. The thermal conductivity and diffusivity of these nanofluids were measured via hot wire-photothermal deflection technique. Based on finite difference method (FDM) temperature distribution and photothermal deflection caused by the hot wire inside nanofluids was obtained. ...

The flow and heat transfer characteristics of TiO2-water nanofluids with different nanoparticle mass fractions in a spirally fluted tube and a smooth tube are experimentally investigated at different Reynolds numbers. The effects of pH values and doses of dispersant agent on the stability of TiO2-water nanofluids are discussed. The effects of nanoparticle mass fractions and Reynolds numbers on ...

We present an analysis of the dispersion characteristics and thermal conductivity performance of copper-based nanofluids. The copper nanoparticles were prepared using a chemical reduction methodology in the presence of a stabilizing surfactant, oleic acid or cetyl trimethylammonium bromide (CTAB). Nanofluids were prepared using water as the base fluid with copper nanoparticle concentrations of ...

This paper presents an investigation on the potential tribological properties of the waterbased cerium dioxide nanofluids. The nanofluids with different nanoparticle concentrations were prepared in a materials laboratory. A stable dispersion of nanoparticles in the fluids was achieved with an appropriate percentage of surfactant sorbitan monostearate. The stability of particle dispersion was st...

In this study we present new data for the thermal conductivity enhancement in four nanofluids containing 11, 25, 50, and 63 nm diameter Aluminum oxide (Al2O3) nanoparticles in distilled water. The nanofluids were prepared using single step method (that is, by dispersing nanoparticle directly in base fluid) which was gathered in ultrasonic device for approximately 7 h. The transient hot-wire las...

Experimental investigation of heat transfer during pool boiling of two nanofluids, i.e., water-Al2O3 and water-Cu has been carried out. Nanoparticles were tested at the concentration of 0.01%, 0.1%, and 1% by weight. The horizontal smooth copper and stainless steel tubes having 10 mm OD and 0.6 mm wall thickness formed test heater. The experiments have been performed to establish the influence ...

Nanofluids are having wide area of application in electronic and cooling industry. In the present work, hydrogen exfoliated graphene (HEG) dispersed deionized (DI) water, and ethylene glycol (EG) based nanofluids were developed. Further, thermal conductivity and heat transfer properties of these nanofluids were systematically investigated. HEG was synthesized by exfoliating graphite oxide in H2...

Dynamic viscosity values for three particular water-based nanofluids have been experimental determined using a commercial ‘piston-type’ viscometer. Viscosity data, expressed as a function of temperature and particle volume fraction, are presented for 29nm particle-size CuO-water and Al2O3-water with 36nm and 47nm particle-sizes, temperatures up to 75°C and particle volume fraction up to 9%. In ...