one of the most commonly used techniques to reduce the corrosion rate of rebar in concrete is addition substances named corrosion inhibitors into the concrete. corrosion inhibitor is chemical compounds that were added to concrete to prevent corrosion of steel in concrete. sodium nitrate is a type of anodic inhibitors that this study investigatesthe effect of this inhibitor on the properties of ...

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

in this study, the effects of oleothermal modification on physical and mechanical peroperties of fir wood (abeis sp.) blocks were examined. at first, some blocks of fir wood with 5 × 20 × 120 cm dimensions were prepared. the blocks were treated in soybean oil. the effects of 3 factors such as treatments temperature (180and 200 °c), holding time (12 and 15 h) and initial moisture content of wood...

during natural gas processing, water in natural gas may cause to hydrates formation in pipelines which may lead to serious damages to process equipments. given the problems raised by present of water in natural gas, glycol solvent uses to remove water.in contact of glycol with gas always an amount of btex and voc absorb along with water, which on glycol recovery process, these substances separa...

Background and purpose: Studies show that surface or subsurface water in some areas near to the pollutant sources, to an extent higher than the permisible potable limit are contaminated with cadmium. There are different reports about biological absorption of cadmium in high concentrations (present in industrial effluents) by bacterial biomass, but there is less report about removing of low co...

in civil engineering concrete is a material combined of hydraulic cement, sand, gravel and water. gravel and sand compose 60 to 70 percent of concrete. these aggregates support compression force of concrete. cement paste acts as glue to stick grain together. in bushehr factories producing aggregates do not operate according to astm standards, so that fineness modulus (fm) of the produced sands ...

flow in natural river bends is a complex and turbulent phenomenon which affects the scour and sedimentations and causes an irregular bed topography on the bed. for the reason, the flow hydralics and the parameters which affect the flow to be studied and understand. in this study the effect of bed and wall roughness using the software fluent discussed in a sharp 90-degree flume bend with 40.3cm ...

Background and purpose: Çadmium is one of the toxic elements which contaminate water resources through industrial, domestic, agricultural effluents and un hygienic burdening of industrial and urban waste materials. Studies shows that surface and subsurface waters in some areas near to the pollutant sources are contaminated with cadmium 0.1 to 1.0 mg/l. No study has been done about omiting the...