in this paper, a dc-dc resonant converter with high voltage gain and small size is studied. to reduce the size and weight of this converter, the operating frequency should be as high as possible. in this research, the frequency changes from 120 to 200 khz. due to the high operating frequency, it is necessary to reduce the switching losses using soft switching methods. resonant converters are su...

in this paper, a low voltage and low power (lv/lp) operational transconductance amplifier (ota) using fgmos (floating-gate mos) transistor is proposed. the relative tuning range of 50 is achieved in this ota while only consumes 40 µw with 1.0 v supply voltage in tsmc 0.18 µm cmos technology. the simulation results of the proposed ota show an open loop gain of 30.2 db and a unity gain frequency ...

In this paper, a DC-DC resonant converter with high voltage gain and small size is studied. To reduce the size and weight of this converter, the operating frequency should be as high as possible. In this research, the frequency changes from 120 to 200 kHz. Due to the high operating frequency, it is necessary to reduce the switching losses using soft switching methods. Resonant converters are su...

In this paper, a DC-DC resonant converter with high voltage gain and small size is studied. To reduce the size and weight of this converter, the operating frequency should be as high as possible. In this research, the frequency changes from 120 to 200 kHz. Due to the high operating frequency, it is necessary to reduce the switching losses using soft switching methods. Resonant converters are su...

In this work a low power, low voltage and high gain operational amplifier is proposed. For this purpose a negative resistance structure is used in parallel with output to improve the achievable gain. Because of using self cascode transistors in the output, the proposed structure remains approximately constant in a relatively large output voltage swing causing an invariable gain. To evaluate the...

In this paper, a series Z-source inverter based on switched inductors cell is proposed for the first time. This inverter is able to increase the voltage gain in comparison to the conventional Z–source inverters in additon to solve the ST (shoot-through) state’s problems. In this inverter, the value of voltage gain is increased by increasing the number of used diodes and inductors in the switche...

this paper proposes a low voltage (±0.55v supply voltage) low power (44.65µw) high common mode rejection ratio (cmrr) differential amplifier (d.a.) with rail to rail input common mode range (icmr), constant transconductance (gm) and enhanced frequency performance. its high performance is obtained using a simple negative averaging method so that it cancels out the common mode input signals at th...

A non-isolated DC/DC converter with high transfer gain is proposed in this paper. The presented converter consists of the switched inductor and three-level converters. The DC/DC power converter is three-level boost converter to convert the output voltage of the DC source into two voltage sources. The main advantages of DC/DC converter are using low voltage semiconductors and high gain voltage. ...

This article proposed a simple self cascode RGC amplifier configuration to increase the gain and bandwidth. The cascode amplifier eliminates the miller capacitance between input and output and facilitates high gain, high input and output impedance with high bandwidth. However, the cascode amplifier requires relatively high supply voltage for proper operation and it decreases the output voltage ...