long-throated flumes are measurement structures often used in water and wastewater systems to determine the flow discharge. the head-discharge relationship of long-throated flumes is traditionally determined following the critical flow theory and the boundary layer concept. after a review of the traditional approach and an analysis of the approximate assumptions of the boundary layer approach, ...

in this study, a numerical simulation using the cfd software, fluent, has been conducted to examine the effect of various shapes of the venturi component sections in order to find the optimum venturi specifications to increase the egr rate with minimum pressure loss at the part load operation range. the cfd results reveal that the venturi should be precisely optimized to introduce the required ...

Venturi injector is widely used in fertigation system due to its obvious advantages such as cheap and robust system without mobile pieces, simple structure, convenient to operation, stable performance, needless of external energy for operation etc. At present, the hydraulic parameters such as suction capacity (injection rate) for the most of the Venturi injectors produced domestically are not v...

The Venturi meter is a straightforward pipeline device used for the metering of gas and liquids. This article presents a brief summary of the creation and characterisation of the modern Venturi meter, including the historic development of public domain algorithms to derive two phase (gas and liquid) flow rates from differential pressure measurements. The use of Venturi meters in multiphase oil ...

Fixed performance venturi devices should provide a predetermined oxygen concentration at an outflow which exceeds an adult's peak resting inspiratory flow rate (approximately 30 l.min(-1)). Campbell's original description mentioned the sensitivity of the venturi device to downstream resistance but gave no further details. This study examined outflow and oxygen concentration from the five standa...

BACKGROUND The factors that influence nocturnal compliance among patients prescribed low flow oxygen therapy were determined and tolerance of nasal cannulae and Venturi face masks compared. METHODS Two studies were performed: (1) a prospective study of 99 hospitalised patients prescribed low flow oxygen therapy, 49 on nasal cannulae and 50 on Venturi face mask; and (2) a prospective study of ...

An efficient venturi scrubber system making use of heterogeneous nucleation and condensational growth of particles was designed and tested to remove fine particles from the exhaust of a local scrubber where residual SiH4 gas was abated and lots of fine SiO2 particles were generated. In front of the venturi scrubber, normal-temperature fine-water mist mixes with high-temperature exhaust gas to c...

Abstract:-The FSAE guidelines state that it is mandatory for each and every car participating in the said event to have a single circular 20mm restrictor in the intake system. All the air flowing to the engine must pass through this restrictor. Conventionally, a Venturi Nozzle is used as a restrictor. In our research, we have proposed two Nozzles: De-Laval Nozzle and Bell Nozzle as an alternati...