this paper presents a macro model to predict unreinforced masonry structures in plane behavior. the model is based on the concept of multilaminate theory. in the past, the method has been used to model behavior of soil, disregarding the cohesion and the tensile strength. regarding its mathematical base, and the possibility of applying in other cases, this method is used to predict the ultimate ...

A thin layer of ductile fiber-reinforced mortar material referred to as Engineered Cementitious Composites, or ECC has been experimentally investigated as a seismic retrofit for unreinforced masonry infill walls in non-ductile reinforced concrete frames. Compression tests of masonry prisms retrofitted with 13mm of ECC were conducted representing the compression strut of a masonry infill under i...

When testing multi-story structures on a shaking table, most testing facilities require a reduced scale model. Producing scale test units at small scale is particularly challenging for unreinforced masonry structures. Previous work by other researchers showed that scaling of units and mortar joints is mandatory in order to obtain for the reduced scale masonry failure modes, which are similar to...

When testing multi-storey structures, most testing facilities require the testing of a reduced-scale model. A literature review on tests of scaled masonry structural components revealed that scaling of masonry was rather challenging and often significant differences in stiffness, strength and failure mechanisms between the different sized masonry were reported. This paper addresses the scaling ...

This paper presents a novel interface element for the geometric and material nonlinear analysis of unreinforced brick-masonry structures. In the proposed modelling approach, the blocks are modelled using 3D continuum solid elements, while the mortar and brick-mortar interfaces are modelled by means of the 2D nonlinear interface element. This enables the representation of any 3D arrangement for ...

Unreinforced masonry is that in which the tensile strength of the masonry is taken into consideration in design. Allowable out-of-plane tensile stress values are a function of the mortar type, such as Portland cement/lime mortar vs. masonry cement mortar or type M or S mortar vs. type N mortar. The allowable tensile stress is also a function of the masonry construction, such as tension parallel...

This paper describes a methodology for analyzing the impulse pressure response of unreinforced concrete masonry walls that have been retrofitted with membranes that are not bonded to the masonry (catcher systems). Membrane catcher systems can be used to protect building occupants from secondary debris resulting from blast pressure, and the effectiveness of systems comprising polymers, composite...

Masonry in one form or another is used in most areas of the world that are prone to interplate or intraplate earthquakes. Masonry structures constructed from traditionally fired or stone bricks have one characteristic that sets them apart from most other structures. If a masonry building is well constructed, it can last for millenniums. Research in the field of Damage Mechanics has identified t...