the forced convection heat transfer of turbulent al2o3-water nanofluid flow inside the grooved tubeswith the different aspect ratio of the rectangular grooves is numerically investigated. the governingequations have been solved using finite volume method (fvm) coupled with simple algorithm. it isassumed the heat flux is constant on the grooved walls. the single-phase approach is applied for the...

in this paper, convection heat transfer of al2o3-water nanofluid turbulent flow through internally ribbed tubes with different rib shapes (rectangular, trapezoidal and semi-circular) is numerically investigated. for each rib shape, the optimum geometric ratio and volume fraction were calculated using entropy generation minimization technique. the governing equations in steady state and axisymme...

in this paper, the problem of turbulent forced convection flow of water- alumina nanofluid in a uniformly heated pipe has been thoroughly investigated. in numerical study, single and two-phase models have been used. in single-phase modeling of nanofluid, thermal and flow properties of nanofluid have been considered to be dependent on temperature and volume fraction. effects of volume fraction a...

force convection heat transfer of turbulent nano fluid flow in 90 and 60 degree elbow is simulated by using fluent. single phase model has been implemented to study such a flow field and standard

In this paper, the problem of turbulent forced convection flow of water- alumina nanofluid in a uniformly heated pipe has been thoroughly investigated. In numerical study, single and two-phase models have been used. In single-phase modeling of nanofluid, thermal and flow properties of nanofluid have been considered to be dependent on temperature and volume fraction. Effects of volume fraction a...

In this work, CFD is used to simulate the flow in an existing thermal labyrinth located at the basement of a hospital building. This labyrinth is an underground channel equipped with water tanks to increase the thermal mass and reduce the heating and cooling demand of the building. Thermal energy storage in the water tanks is a complex heat transfer phenomena involving turbulent forced convecti...

Convection over the building envelope is a critical determinant of building cooling load, but parameterization of convection in building energy models and urban computational fluid dynamics models is challenging. An experimental investigation intended to clarify the heat transfer mechanism of a convective wall boundary layer (WBL) on a leeward, vertical building wall was conducted at the Compre...

T. Tsuji Y. Nagano Department of Mechanical Engineering Nagoya Institute of Technology, Nagoya, Japan l lA turbulent natural convection boundary layer along a vertical flat plate in air is investigated with hot-wire techniques. Profile measurements of mean velocity, mean temperature, and turbulent quantities, which are obtained well into the wall region, clarify some characteristics peculiar to...

Homogeneous anisotropic turbulence simulations are used to determine off-diagonal components of the Reynolds stress tensor and its parameterization in terms of turbulent viscosity and Λ-effect. The turbulence is forced in an anisotropic fashion by enhancing the strength of the forcing in the vertical direction. The Coriolis force is included with a rotation axis inclined relative to the vertica...