Two different inverse design approaches are proposed for developing wind turbine blades for sub-scale wake testing. In the first approach, dimensionless circulation is matched for full scale and sub-scale wind turbine blades for equal shed vorticity in the wake. In the second approach, the normalized normal and tangential force distributions are matched for large scale and small scale wind turb...

Wells turbine is a self-rectifying air turbine which is widely used in oscillating water column energy converter. The Wells turbine will always rotate in the same direction irrespective of the direction of the oscillating airflow. Furthermore the Wells turbine has a simple configuration and structure. This is why the Wells turbine is very commonly used for conversion of wave energy. At present ...

Turbine blades are high value castings having complex internal geometry. Computed Tomography has been employed on Turbine blades for finding out defects and internal details. The wall thickness, rib thickness and radius of curvature are measured from the CT slices. The discontinuities including blockages of cooling passages in the cast material can be detected. 3D visualization of the turbine b...

Offshore wind turbine blades suffer from various faults such as blade angle asymmetry, icing, and bends. Replacement of rotor blades normally involves heavy transportation (e.g., vessel and crane), and dependency on weather conditions. As a result, wind turbines come to a long standstill and costs on energy production increase. One approach to reducing the downtime and costs is to apply a prope...

During their operation, wind turbine blades are eroded due to rain and hail, or they are contaminated with insects. Since the relative inflow velocity is higher at the outer than at the inner part of the blades, erosion occurs mostly at the outer blade region. In order to prevent strong erosion, it is possible to install a leading edge protection, which can be applied to the blades after the in...

In this study, effects of lacing rods location on natural frequencies of last stage of a Steam Turbine Blades (STBs) have been investigated. STBs are critical and important elements in a turbine as well as power plants. One of the most important parameters in turbine blades is lacing rods location. In this paper, first, a three dimensional (3D) scan was used to produce the geometrical model of ...

large-scaled blade has posed many problems related to design and production. After introducing the features of blade with thick airfoils and flatback, based on relevant parameters of Huaren 100 kW wind turbine, the paper designed blade with thick airfoils and flatback, introduced blade parameter design, and analyzed the aerodynamic performance of blades using GH bladed software, obtaining the r...

Over the centuries, energy has been supplied by wood, coke, coal, oil and natural gas, as well as by uranium (nuclear energy). All these energy sources are limited and at the same time these energy sources create pollution problems. This has led to the focus on a sustainable energy supply, which implies optimized use of energy, minimized pollution. That is why wind energy is prominent and it is...

Offshore wind power production is an attractive clean energy option, but the difficulty of access can lead to expensive and rare opportunities for maintenance. As part of the Structural Health and Prognostics Management (SHPM) project at Sandia National Laboratories, smart loads management (controls) are investigated for their potential to increase the fatigue life of offshore wind turbine roto...