In this research study, one of the most crucial automotive engineering problems is intended to be solved. The necessity of tire pressure monitoring system is beyond doubt. Such systems are now provided relying on expensive sensors. In this study an indirect tire pressure monitoring system is proposed, utilizing identification techniques, which will reduce the cost of monitoring considerably in ...

Nacrtak The motion resistance ratio, gross traction ratio and net traction ratio of a wheel cable skidder were determined and mathematical models derived for three tire inflation pressure values with or without tire chains on forest road in mountainous conditions. The motion resistance ratio increases with the increase of tire inflation pressure. On the contrary, the gross traction ratio increa...

In this research study, one of the most crucial automotive engineering problems is intended to be solved. The necessity of tire pressure monitoring system is beyond doubt. Such systems are now provided relying on expensive sensors. In this study an indirect tire pressure monitoring system is proposed, utilizing identification techniques, which will reduce the cost of monitoring considerably in ...

This work presents a single-chip sub-mm3 wireless pressure sensor suitable for tire pressure monitoring. The dynamic behavior and safety of an automobile tire is closely dependent on its inflation pressure: maintaining the manufacturerrecommended pressure is essential to prevent tire failure, provide stability, improve fuel efficiency and tire-life, and to reduce CO2 emissions [1]. Thus, Tire-P...

Occurrence of top down and bottom up fatigue cracking in asphaltic pavements is common. Conventional pavement analysis methods ignore the existence of cracks in asphaltic layers. However, it seems that the responses of cracked pavement would not be the same as a pavement without crack. This paper describes effects of crack type, position and length, and vehicles tire inflation pressure and axle...

abstract: compaction under tractors tires is of special concern because the weight of these machines has increased dramatically in the last years. these machines and others associated with crop cultural practices weight enough to significantly compact the soil, especially if the soil is soft with high moisture content during tilling, planting, or harvesting. the stress distribution and the size...

Materials such as waste tire chips were widely used to improve the strength of soil. The objective of this study is to discuss the residual strength or steady-state behavior of sand-waste tire chip mixtures. A series of undrained monotonic triaxial compression tests were conducted on reconstituted saturated specimens of sand and sand-tire chip mixtures with variation in the tire-chip contents f...

excessive production and stockpile of scrap tires cause some environmental and sanitary risks throughout the world. to manage these materials, possible use of soil-tire mixtures has been recently propounded in civil engineering projects. a few studies previously have been conducted to evaluate behavior of clay-tire mixtures, while swelling properties, consolidation and settlement characteristic...

In order to improve the precision of the tire pressure monitoring system, the Bayes method is applied to establish its mathematical model of multi-sensor information fusion. The temperature and pressure in the tire, which are the complementary information, are integrated in the model through analyzing the mechanism of tire burst generated by temperature and pressure. Through the temperature com...

Tire cavity noise refers to the vehicle noise due to the excitation of the acoustic mode of a tire air cavity. Although two lowest acoustic modes are found to be sufficient to characterize the cavity dynamics, the dynamical response of these two modes is complicated by two major factors. First, the tire cavity geometry is affected by the static load applied to the tire due to vehicle weight. Se...