Characteristics of rotor blade tip clearance flow in axial compressors can significantly affect their performance and stable operation. It may also increase blade vibrations and cause detrimental noises. Therefore, this paper is contributed to investigate tip leakage flow in a low speed isolated axial compressor rotor blades row. Simulations are carried out on near-stall condition, which is val...

Reliability of gas turbine power plant is related to the blade normal operation. In this paper, a new on-line condition monitoring method has been presented to evaluate two important factors affecting the turbine blades that are the tip clearance and tip deformation. A K band’s microwave sensor has been simulated and optimized in CST Microwave Studio software. Scattering parameters of the near...

The present paper investigates the effects of the trapezoidal teeth labyrinth seal on the leakage amount in gas turbines. The influences of increasing the number of teeth from 1 to 6 with step 1 and the tip clearance s=0.5 to 7.5 mm on the leakage flow at different pressure ratios of PR=1.5, 2 and 2.5 are examined, comprehensively. The analysis is performed numerically using a Finite-Volume...

It is desirable to further increase the efficiency of turbo machines. In axial flow gas turbine, imprecise axial gap and tip clearance are two significant sources of inefficiency. This work investigates the effect of change in parameters such as axial gap and tip clearance on axial flow gas turbine used in power generation. Different combinations of axial gap and tip clearance have been tested ...

Tip clearance between blade end and shroud is inevitable in pump operation and of great importance on pump energy performance and pressure fluctuation. As the tip clearance size increases, the head and efficiency of the mixed flow pump drop accordingly. The simulation results show that the development of a leakage vortex is observed as the tip clearance increases, and the trajectory of this lea...

To explore the influence of tip clearance on pressure fluctuation in a low specific speed mixed-flow pump, tip clearances δ of 0.25 mm, 0.75 mm and 1.00 mm, along with no tip clearance, were selected. The reliability of the simulation was verified by comparison with the experimental data of external characteristics and fluctuation in the guide vane passage. Through ANSYS-CFX, MATLAB code and fa...

The energy performance and radial force of a mixed flow pump with symmetrical and unsymmetrical tip clearance are investigated in this paper. As the tip clearance increases, the pump head and efficiency both decrease. The center of the radial force on the principal axis is located at the coordinate origin when the tip clearance is symmetrical, and moves to the third quadrant when the tip cleara...