The effects of TiO2 photocatalysis on the hydrolysis of protein of waste activated sludge (WAS) and its biodegradability were investigated in this study. After 12-h UV irradiation, the removal ratio of protein by TiO2 photocatalysis reached 98.1%. The optimal condition for photocatalytic degradation of protein is TiO2 dosage of 5.0 mg·L under 2.4 w·m UV light irradiation. TiO2 photocatalysis in...

Sandwich structured graphene modified TiO2 mesoporous single crystals (GR-MSCs) were obtained by using the graphene embedded silica spheres as the hard template, via a hydrothermal treatment. The selective photocatalysis of TiO2 can be achieved by controlling the location of graphene in TiO2 mesoporous single crystals. The sandwich structured graphene-TiO2 composite has a photooxidation surface...

The degradation of pesticide Carbendazim was investigated by combination of TiO2-based photocatalysis and ozonation. A batch annular photoreactor has been used for carrying out the combined process and the influence of TiO2 concentration, ozone dose and pH were investigated. The results showed that the removal rate increased with increase in ozone dosage upto 0.48 g/h and decreased above 1g/L o...

Effects of different flocculants (chloride-based salts and ferric and ferrous salts) and initial organic concentration of wastewater on flocculation-photocatalysis hybrid process were investigated. Titanium Dioxide (TiO2) adsorption alone, flocculation alone, flocculation followed by TiO2 adsorption, photocatalysis alone, and flocculation followed by photocatalysis removed 60%, 72%, 80%, 85%, a...

Here, we show that resistance of Escherichia coli to TiO2 photocatalysis involves defenses against reactive oxygen species. Results support the idea that TiO2 photocatalysis generates damage which later becomes deleterious during recovery. We found this to be partly due to DNA attack via hydroxyl radicals generated by the Fenton reaction during recovery.

Based on the TiO2 photocatalysis mechanism, a new method of simultaneous desulfurization and denitrification from flue gas was proposed. Preparation of TiO2 photocatalyst, design of photocatalysis reactor and influencing factors for simultaneous removal of SO2 and NO, and removal mechanism of SO2 and NO were studied. After the optimal values of concentration of O2 in flue gas, the relative humi...

Fe-TiO2 on granular activated carbon support was synthesized via hydrothermal method without calcination. The crystalline phases were identified using X-ray diffraction whereas the surface morphologies were examined using scanning electron microscopy. Peaks of anatase TiO2 and graphite were present in the Fe-TiO2-GAC sample. Comparisons of the surface features of GAC and Fe-TiO2-GAC show that F...

ticl4, ammonia, inorganic salts as raw material, nanometer composite-crystal tio2 powders were synthesized by two-step chemical method. precursors were crystallized with different phase and stable composite-crystal tio2 with anatase and rutile phase was prepared at low temperature. quantitative control of crystal phase was realized. remarkable factors including reaction ph value, reaction time,...

Although TiO2 was formerly a common material for photocatalysis reactions, its wide band gap (3.2 eV) results in absorbing only ultraviolet light, which accounts for merely 4% of total sunlight. Modifying TiO2 has become a focus of photocatalysis reaction research, and combining two metal oxide semiconductors is the most common method in the photocatalytic enhancement process. When MoO3 and TiO...

The highly toxic Cr(VI) is a critical component in the Chromated Copper Arsenate (CCA) formulations extensively employed as wood preservatives. Remediation of CCA mixed waste and discarded treated wood products is a significant challenge. We demonstrate that UV/TiO2 photocatalysis effectively reduces Cr(VI) to less toxic Cr(III) in the presence of arsenate, As(V), and copper, Cu(II). The rapid ...