The paper describes new approach of potentiostat for very low sensor current measurements. Recent potentiostats were used as measurement devices which were standalone and sensors were connected by a screened wire. These concepts are inconvenient for the presented very low current measurements. The new approach is based on the potentiostat circuitry integrated on a chip that should be directly c...

Dye-sensitized solar cells (DSSCs) are categorized as some of inexpensive thin-film solar cells. The basis and foundation of these cells is a semiconductor that consists of an electrolyte and a light-sensitive anode. Titanium dioxide (TiO2) is a semiconductor that plays the role of anode and is the main constituent of these cells. In this paper, we have addressed the functionality and performan...

This article presents the use of a microstrip dual resonator for nondestructive permittivity characterization of a ferroelectric thin film at microwave frequencies. The dual-resonator measurement fixture consists mainly of two capacitively coupled microstrip resonators, with the ferroelectric thin film covering the gap between the two resonators. The dielectric constant and loss tangent of the ...

High frequency measurements from 0.1 GHz to 40 GHz were performed on industry standard flip chip thin film resistors from Vishay Thin Film. The results of these measurements are reported in this paper. A lumped circuit model is presented that accurately predicts the response of various part values and case sizes. The results of the measurements and model are combined to demonstrate basic design...

In the present work, the performance of thin film GaAs solar cells with a mirror back contact is compared to regular GaAs cells on a substrate. A world record efficiency of 24.5% AM1.5G is obtained for a thin film cell with a gold mirror. The thin film cell thickness is only half of the regular GaAs cell thickness, which improves the radiation resistance for use in space applications and enhanc...

For analyzing the long-term behavior of thin film a-Si/μc-Si photovoltaic modules, it is important to observe the light-induced degradation (LID) in dependence of the temperature for the parameters of the one-diode model for solar cells. According to the IEC 61646 standard, the impact of LID on module parameters of these thin film cells is determined at a constant temperature of 50°C with an ir...

Integrated InP polarization converters based on half-ridge structure are studied numerically. We demonstrate that the fabrication tolerance of the half-ridge structure can be extended significantly by introducing a slope at the ridge side and optimizing the thickness of the residual InGaAsP layer. High polarization conversion over 90% is achieved with the broad range of the waveguide width from...

We have utilized a transmission ratio (TR) between curtain-shaped (Curtain) Mura and non-Mura zones as a key parameter to characterize the optical appearance of Curtain Mura occurred on a 13.3-in TFT–TN panel (Mura sample) after bonding process to place silicon-based driver-IC chips on one of the panel substrates using anisotropic conductive film as a binder (COG ACF process). Our measured TRs ...

0a thin film of cobalt hexacyanoferrate (cohcf), an analogue of mixed-valence prussian blue, was deposited electrochemically on the glassy carbon, platinum and gold electrode surfaces in 0.5m kc1 solution. the electrochemical behavior of these modified electrodes show three couples of redox peaks by cv in a supporting electrolyte solution of 0.5m nacl, whereas for au modified electrode only one...

A new source follower circuit using low-temperature polycrystalline silicon thin film transistors (LTPS-TFTs) as analog buffer for the integrated data driver circuit of active matrix liquid crystal displays (AMLCDs) and active matrix light emitting diodes (AMOLEDs) is proposed and measured. Threshold voltage compensation circuit with two n-type thin film transistors, a capacitor, and four switc...