[1] The development of transient thermal stress in suboceanic mantle is investigated on the basis of two-dimensional thermoviscoelastic models incorporating composite rheology appropriate for dry oceanic lithosphere. Thermal stress is shown to be sufficiently high to deeply fracture the coldest part of lithosphere, e.g., to the depth of at least 30 km (and possibly down to 50 km) in 100-Ma-old ...

It is broadly accepted that so-called 'thermal' gas is the product of thermal cracking, 'primary' thermal gas from kerogen cracking, and 'secondary' thermal gas from oil cracking. Since thermal cracking of hydrocarbons does not generate products at equilibrium and thermal stress should not bring them to equilibrium over geologic time, we would not expect methane, ethane, and propane to be at eq...

One of the limiting factors in large-scale cryopreservation is the formation of fractures. The prevalence of cracking in cryopreserved bulky tissues is frequently associated with temperature gradients, which lead to non-uniform thermal contraction of the tissue. With new cryoprotectants available, it may be possible to reduce temperature gradients to much lower levels, in which case other contr...

In this study, the early-age strain–stress development of mixtures containing slag cement was measured on uniaxially restrained specimens using a specially designed testing frame starting right after casting. It was found that thermal deformation dominates early-age stress development in low w/cm and low slag cement paste systems. While for concrete, autogenous shrinkage is the major contributi...

productivity of an oil well is an important parameter in any oil field development. low production rate of the wells, impose more production wells drilling which directly jeopardizes the economical feasibility of the project. oil production rate in some of the wells is very low due to low permeability of the reservoir rock. several practice like hydraulic fracturing and acid fracturing is very ...

Two themes form the basis of this study on fibre reinforced laminated composites: namely 'thermal residual stress' and 'transverse cracking'. Thermal residual stresses are inherent to any composite structure and are internal stress within the structure that form during manufacture. Their formation arises from the difference in coefficient of thermal expansion of the fibre and the matrix. These ...

Iodine-induced stress-corrosion cracking (ISCC), a known failure mode for nuclear fuel cladding, occurs when iodine generated during the irradiation of a nuclear fuel pellet escapes the pellet through diffusion or thermal cracking and chemically interacts with the inner surface of the clad material, inducing a subsequent effect on the cladding’s resistance to mechanical stress. To complement ex...

Cracking is a major concern in welding aluminum alloys. Although weld solidification cracks can be eliminated through addition of filler alloy, the additives modify the alloy or base-metal constituents and may not always be desirable. High-energy beam processes, such as electron-beam welding, that result in minimal heat input reduce crack sensitivity, but their high cost limits their applicatio...