introduction: the purpose of the presented study was to evaluate the effect of zirconia thickness on the tensile stress of zirconia based all-ceramic restorations. methods: twenty zirconia disks with 10mm diameter were prepared in two groups using cad/cam system. the thickness of zirconia was 0.5mm in first group and 0.3mm in second group. after sintering, 0.4mm glass ceramic porcelain was appl...

in this research, the possibility of using high percentage of lignocellulosic fibers in making natural fiber-thermoplastic composite was studied. three weight percentages of bagasse flour namely 40, 55 and 70 percents were chosen. mapp was used as coupling agent at two weight percentages of pp, namely 0, 4 and 6 percents. tensile strength was measured applying instron 6025. the results showed t...

Amorphous Fe73B7Si16Nb3Cu1 ribbon was crystallized rapidly by electric current heating under simultaneously applied tensile stress along the ribbon axis. As a result, strong transverse magnetic anisotropy was induced in the ribbon. Dynamic magnetic properties of the ribbons rapidly heated either under the tensile stress or without tensile stress were measured using toroidal cores. Optimal elect...

Mechanically sensitive nociceptor afferents were studied in a preparation of isolated skin from rat leg. Each neuron was studied while the skin was subjected to tensile and compressive loading. The experiment was designed to create highly uniform states of stress in both tension and compression. Tensile loads were applied by pulling on the edges of the sample. Applied loads were used to determi...

Aiming at demonstrating the potential of unidirectional natural fiber-reinforced thermoplastic composites in structural applications, textile flax yarn/thermoplastic polyester composites with variable fiber volume fractions have been manufactured by a filament-winding process followed by a vacuum-assisted compression molding process. The microstructure of the composites shows that the flax fibe...

BACKGROUND In the internal fixation of fractured bone by means of bone-plates fastened to the bone on its tensile surface, an on-going concern has been the excessive stress-shielding of the bone by the excessively-stiff stainless-steel plate. The compressive stress-shielding at the fracture-interface immediately after fracture-fixation delays callus formation and bone healing. Likewise, the ten...

Tetragonal ferroelectric/ferroelectric BaTiO(3)/PbTiO(3) superlattice under uniaxial tensile stress along the c axis is investigated from first principles. We show that the calculated ideal tensile strength is 6.85 GPa and that the superlattice under the loading of uniaxial tensile stress becomes soft along the nonpolar axes. We also find that the appropriately applied uniaxial tensile stress c...

Residual stress development during processing of sol-gel derived ferroelectric thin films influences electromechanical properties and performance. The present work investigates the effects of stress on field-induced polarization switching in ferroelectric Pb~Zr0.52Ti0.48)O3 ~PZT! ~52/48! thin films. Film response is measured as a function of externally applied mechanical stress using a double-b...

The specific growth rates of Escherichia coli and Bacillus cereus were measured for growth media in a flask, a lens-plate arrangement simulating an isolated capillary space, and a lens-plate arrangement under hydrostatic tensile stress. The specific growth rates of the bacteria were the same for the flask and lens-plate arrangement without hydrostatic tensile stress, but were enhanced when the ...

loading conditions and complex geometry have led the cylinder heads to become the most challenging parts of diesel engines. one of the most important durability problems in diesel engines is due to the cracks valves bridge area. the purpose of this study is a thermo-mechanical analysis of cylinder heads of diesel engines using a two-layer viscoplasticity model. in this article, mechanical prope...