In this study electrical discharge process was used to increase surface wear resistance of pure aluminum. Pulse-on-time and pulse current were considered as input parameters of the electrical discharge process. Experimental results reveal that the electrical discharge process is a successful method for improving the surface wear resistance of aluminum, so that this method has greatly increased ...

as the turbine industries need to manufacture turbine blades made of martensitic stainless steel aisi 420 with high toughness and wear resistance, local laser hardening has become more and more important. in this research, surface of the samples was initially hardened by high-power pulsed laser beam; then, optimum parameters of hardening were calculated and wear resistance of surface hardened s...

the impact resistance of new lightweight panel is studied. this panel consists of two thin metal layers bonded together by intermediate fiber/epoxy layers (mcm-sheets). to simulate a behavior of this kind of impact problem, explicit and implicit finite element software abaqus is used. in order to validate the finite element modeling, these results have been compared with experimental test resul...

in this study, the effect of soluble chitosan, thyme oil and linseed oil on the mold resistance of wood and its surface properties was investigated. both low and medium molecular weight chitosan with concentration of 1 and 2% were used. cypress wood samples with dimensions of 20 × 20 × 70 mm and moisture content of 12% were saturated by the preservatives. the results showed that the maximum abs...

As the turbine industries need to manufacture turbine blades made of martensitic stainless steel AISI 420 with high toughness and wear resistance, local laser hardening has become more and more important. In this research, surface of the samples was initially hardened by high-power pulsed laser beam; then, optimum parameters of hardening were calculated and wear resistance of surface hardened s...

skid resistance and road condition are common indices of road safety; therefore providing adequate skidding resistance will reduce the incidence of road accidents. the surface macrotexture has a large effect on the characteristics of road surface skidding, which is the focus of this research. during the study, the mean texture depth of the road surface was measured, in order to determine the co...

The zirconia stabilized by 3mol % Y2O3 (3YSZ) was applied onto the surface of the magnesium alloy AZ91D using electrophoretic deposition (EPD) from a non- aqueous solution. A Ni-P interlayer between the substrate and YSZ coating was also prepared by electroless plating. Finally, coatings were heat treated in control atmosphere at 400 °C. The preparation, microstructure and corrosion resistance ...

y-tial intermetallic alloy have a good potential for use as biomaterial, due to its good corrosion resistance. in this paper, two fundamental electrochemical techniques namely electrochemical impedance spectroscopy and potentiodynamic anodic polarization were used to evaluate the corrosion performance of g-tial in ringer's solution. surface modification treatments were employed with the pu...