Opadry® II 1 Influence of Film Coating Process Parameters on the Gloss of Tablets Coated with Pigmented Aqueous Film Coating Formulations PURPOSE A common practice for enhancing the gloss of coated tablets is the application of a clear top-coat after applying a pigmented coating layer. In a recent study, substantial increases in tablet gloss were achieved using this multiple step approach.1 It ...

Abstract: activity gas diffusion process has been investigated in this research. Effects of coating temperature and aluminumconcentration in powder mixture on formation mechanism were studied using optical and scanning electronmicroscopes, EDS and X-ray diffraction (XRD) techniques. For this purpose two different packs containing 1 and 2wt% aluminum powder, were used for coating the samples at ...

A two-step synthesis for multi-walled carbon nanotube (MWCNT) coating was reported that includes an electrochemical deposition followed by 10 eV hyperthermal proton bombardment at a dose as low as 1×1016 H+/cm2. Electrochemical deposition ensures an improved adhesion of MWCNT coating on metal substrates, while hyperthermal proton bombardment effectively induces inter-chain cross-linkages among ...

We present a facile method for producing anti-fogging (AF) and anti-reflection (AR) coating functionalized photoanodes via one-step SiO2 nanoparticle coating for high performance solid state dye-sensitized solar cells (ssDSSCs). The AF and AR coating functionalized photoanodes are prepared by spin-coating of partially aggregated SiO2 colloidal solution. Poly((1-(4-ethenylphenyl)methyl)-3-butyl-...

We report on the fabrication and characterization of thick UV-patternable hybrid sol-gel films by spin coating using a modified sol-gel process. Thick coating of 25 microns with crack-free surface can be produced by one spin coating step. Thick layers of more than 100 μm can be obtained with a multi-coating process. Characterization using different techniques including optical microscope and at...

Defect generation during organic bottom anti-reflective coating (BARC) in the photo lithography process is closely related to humidity control in the BARC coating unit. Defects are related to the water component due to the humidity and act as a blocking material for the etching process, resulting in an extreme pattern bridging in the subsequent BARC etching process of the poly etch step. In thi...

The combination of the high mechanical strength of metals with the osteoconductive properties of calcium phosphates make hydroxyapatite coatings on titanium implants widely used in orthopedic surgery. However, the most popular coating method, plasma spraying, exhibits some important drawbacks: the inability to cover porous implants and to incorporate biologically active agents, delamination, an...

The multilayer antimony-doped tin dioxide coating was obtained by cathodic deposition of multilayer metal-hydroxide coating with near 100-nm thickness layers on the alloy underlayer accompanied by the anodic oxidation of this coating. The potential regions of deposition of tin, antimony, tin-antimony alloy, and mixture of this metals and their hydroxides in the pyrophosphate-tartrate electrolyt...