dual systems of steel moment frame and reinforced concrete shear wall have combined the advantages of steel frames and reinforced concrete shear wall. these walls have increased the lateral stiffness of steel frames and have reduced seismic demands on steel frames thus providing opportunities to use such system. in this research intermediate dual system of steel moment frame was chosen with int...

Dual systems of steel moment frame and reinforced concrete shear wall have combined the advantages of steel frames and reinforced concrete shear wall. These walls have increased the lateral stiffness of steel frames and have reduced seismic demands on steel frames thus providing opportunities to use such system. In this research intermediate dual system of steel moment frame was chosen with int...

Following the Northridge earthquake of 1994, a significant number of steel moment resisting structural systems were damaged. Several studies have been conducted to improve the seismic performance of steel structures and specially their beam-to-column connections. One of the proposed connections for special moment-resisting frames included AISC-358 is Kaiser bolted bracket moment connection, bri...

Today connections are playing an important role in the steel frames subjected to lateral seismic loading. The steel extended end-plate moment connection can play an important role in the steel frame when subjected to seismic loadings. In the past, this type of connection has been under investigation mainly when it was subjected to monotonic loading. After major recent earthquakes and failure of...

the objective of this paper is to determine the drift demand hazard curves of steel moment-resisting frames with different number of stories in territory of tehran this is done through the combination of the results obtained from probabilistic seismic hazard analysis and the demand estimated through the best probabilistic seismic demand models. to select the best demand model, in this paper, a ...

Abstract:   The use of Concrete beams reinforced with a combination of fiber reinforced polymer (FRP) and steel bars has increased dramatically in recent years, due to improvement in strength and flexural ductility simultaneously. In this paper, we proposed a new equation for estimating the effective moment of inertia of hybrid FRP-steel reinforced concrete (RC) beams on the basis of the...

ao"length of opening dh, dl"distance from top of steel section to centroid of concrete force at high and low moment ends of the opening, respectively dr"distance from outside edge of flange to centroid of reinforcement *b"maximum bending deflection for unperforated beam *m,b"maximum bending deflection for a member with an opening Fy"yield stress of steel FM y"reduced axial strength of steel in ...

This paper describes an experimental investigation into the use of steel bars bonded into glulam timber beams with epoxy resins in order to provide moment-resisting joints between glulam beams and steel supports. The objective of this research was to provide information about the bending and shear strength of such connections. Past research has investigated the use of steel rods epoxy bonded in...

Often unbraced, the stability of steel storage racks may depend solely on the pallet beam to upright connector and on the stiffness of the base plate to floor connection ([1]). This paper presents experimental results from cyclic tests performed on portal beam to upright bolted moment connections intended for cold-formed steel drive-in and drive-through storage racks. In storage racks, portal b...

The present work is aimed at assessing the impact of strong column-weak beam (SCWB) criterion on seismic performance of optimally designed steel moment frames. To this end, different SCWB ratios are considered for steel special moment resisting frame (SMRF) structures and performance-based design optimization process is implemented with the aid of an efficient metaheuristic. The seismic collaps...