Abstract: Based on the characteristics of box girder with corrugated steel webs, the existing prestressing force, the effect of shear deformation of composite girder on the deflection, “folding effect” in longitudinal direction of corrugate steel webs and the arrangement of external tendons were considered comprehensively. With the experiment results of five literatures integrated, N/fcA (the a...

The streamline flat steel box girder is broadly used in long span cablesupported bridges all over the world. As one of the most important part of the bridges, its stress level and distribution under various dynamic loads are especially concerned. However, it is difficult to obtain the accurate stress of the steel box girder by common finite element (FE) calculation. The Runyang Suspension Bridg...

In steel trapezoidal box girder bridge systems, the U-shaped steel girder is designed to act compositely with the concrete deck to form a closed box for live loading. During the construction stage, however, the behavior is not well understood. The usual practice of assuming the system to be non-composite during construction requires substantial top flange bracing to form a quasi-closed box sect...

In this paper, the stress-related damping ratio formula of box girder with corrugated steel webs is introduced. Using response spectrum method, an iterative algorithm is proposed to calculate the seismic response and the stressrelated damping ratio under different seismic intensities. Based on a simply supported composite box girder bridge with corrugated steel webs, the stress-related damping ...

Industrial Photogrammetry which has advantages of high accuracy and fast measurement time is widely used in the manufacture measurement application. Especially, industrial photogrammetry has more powerful capability of quickness in the 3 dimensional coordinate measurement then comparing with optical measurement system like total station, laser tracker and laser scanner. The purpose of this pape...

in this paper, full scale load test of a horizontally curved steel box-girder bridge is carried out in order to detect structural defects, which reportedly result in unwanted vibrations in nearby buildings. the bridge is tested under the passage of six heavy vehicles at different speeds, so as to determine its static and dynamic responses. a total number of one hundred and two (102) sensors are...

In this paper the parametric study is carried out to investigate the effect of number of cells in optimal cost of the non-prismatic reinforced concrete (RC) box girder bridges. The variables are geometry of cross section, tapered length, concrete strength and reinforcement of the box girders and slabs that are obtained using ECBO metaheuristic algorithm. The design is based on AASHTO standard s...

Abstract: Aerodynamic admittance is a key parameter affecting the analysis accuracy of the bridge buffeting response. However, few articles have covered the issue of the wide-body flat box girder with much smaller depth-width ratio (such as 1/12 studied in this paper). Therefore, to explore the real buffeting force of the wide-body flat box girder, experiments of the static force coefficients a...

Acoustic emission (AE) testing was deployed on details of two large steel Interstate Highway bridges: one cantilever through-truss and one trapezoidal box girder bridge. Quantitative measurements of activity levels at known and suspected crack locations were made by monitoring AE under normal service loads (e.g., live traffic and wind). AE indications were used to direct application of radiogra...