pushover analysis is a simplified nonlinear analysis technique that can be used to estimate the dynamic demands imposed on a structure under earthquake excitations. one of the first steps taken in this approximate solution is to assess the maximum roof displacement, known as target displacement, using the base shear versus roof displacement diagram. that could be done by the so-called dynamic p...

the nonlinear static procedures (nsps) proposed by design codes do not lead to reliable results especially for tall buildings. they generally provide inconsistent estimates of inelastic seismic demands, especially for the top floors due to their inabilities in considering the higher modes effects. in this paper, a new enhanced pushover procedure is proposed which is based on the envelope of the...

the purpose of this study is to determine the effect of vierendeel panel width and vertical truss spacing ratio in an inelastic behavior of the stf system due to earthquake loads. the stf system is applied to a six-storey building that serves as apartments [2]. the stf system is used in the building in the transverse direction (n-s direction), while in the longitudinal direction (w-e direction)...

the objective of this review to be submitted in two independent parts, for steel frames and for rc frames, is to compare their structural performance with respect to the proposed n2-method, and so also of the consequent convenience of using pushover methodology for the seismic analysis of these structures. a preliminary investigation is presented on a pushover analysis used for the seismic perf...

Rooted in structural dynamics theory, three approximate procedures for estimating seismic demands for bridges crossing fault-rupture zones and deforming into their inelastic range are presented: modal pushover analysis �MPA�, linear dynamic analysis, and linear static analysis. These procedures estimate the total seismic demand by superposing peak values of quasi-static and dynamic parts. The p...

As more and more emphasis is being laid on non-linear analysis of RC framed structures subjected to earthquake excitation, the research and development on both non-linear static (pushover) analysis as well as nonlinear dynamic (time history)analysis is in the forefront. Due to prohibitive computational time and efforts required to perform a complete nonlinear dynamic analysis, researchers and d...

the objective of this review to be submitted in two independent parts, for steel frames and for rc frames, is to compare their structural performance with respect to the proposed n2-method, and so also of the consequent convenience of using pushover methodology for the seismic analysis of these structures. a preliminary investigation is presented on a pushover analysis used for the seismic perf...

nonlinear static procedure (nsp) is a common technique to predict seismic demands on various building structures by subjecting a monotonically increasing horizontal loading (pushover) to the structure. therefore, the pushover analysis is an important part of each nsp. accordingly, the current paper aims at investigating the efficiencyof various algorithms of lateral load patterns applied to the...

double- unsymmetric-plan medium-rise buildings subjected to bi-directional seismic excitation are complex structures where higher-mode effects in plan and elevation are important in estimating the seismic responses using nonlinear static or pushover analysis. considering two horizontal components of the ground motions makes the problem more intricate. this paper presents a method for nonlinear ...

The nonlinear static procedure (NSP) or pushover analysis in FEMA-273 [FEMA, 1997] has become a standard procedure in current structural engineering practice. Seismic demands are computed by nonlinear static analysis of the structure, which is subjected to monotonically increasing lateral forces with an invariant height-wise distribution until a target displacement is reached. None of the curre...