low stacking fault energy face centered cubic (fcc) materials contain characteristic defect structures. stackingfault tetrahedral are one of those rare structures that occur under special experimental conditions. for the first time,stacking fault tetrahedral were observed in fe-30mn-3al-3si twinning induced plasticity (twip) steel. theirpresence resulted from a quenching heat treatment.

Low stacking fault energy face centered cubic (FCC) materials contain characteristic defect structures. Stacking fault tetrahedral are one of those rare structures that occur under special experimental conditions. For the first time, stacking fault tetrahedral were observed in Fe-30Mn-3Al-3Si twinning induced plasticity (TWIP) steel. Their presence resulted from a quenching heat treatment.

in this study, the effect of tensile test temperature (148 to 673 k) on the microstructural evolutions and the mechanicalproperties of high manganese twinning induced plasticity (twip) steel with the chemical composition of fe-31mn-3al-3si (wt. %) was investigated. xrd, sem and tem were used to study the microstructural evolutions.stacking fault energy (sfe) of the alloy was also calculated by ...

in this work, dynamic mechanical properties of three high-manganese steels with trip/twip or fully twip characteristics are studied. high strain rate experiments in the range of true strain rates between ~500 and 1800 /s are conducted using a dynamic torsional testing setup. all the three steels show a positive strain rate sensitivity in the intermediate range of strain rates (up to 500 /s). bu...

in this paper, the correlation between the surface rumpling and cracking phenomena with twinning mechanism during plastic deformation of hadfield steel has been investigated. the effect of stacking fault energy and the amount of strain are evaluated. the experimental samples with specific amounts of carbon, manganese and aluminum resulting in different stacking fault energies, were produced usi...

Stacking fault tetrahedra, the three-dimensional crystalline defects bounded by stacking faults and stair-rod dislocations, are often observed in quenched or irradiated face-centred cubic metals and alloys. All of the stacking fault tetrahedra experimentally observed to date are believed to originate from vacancies. Here we report, in contrast to the classical vacancy-originated ones, a new kin...

Plan-view and cross-sectional transmission electron microscopy have been used for a detailed study of the defects formed in capped InAs/GaAs quantum dot QD samples. Three main types of defects, V-shaped defects, single stacking faults, and stacking fault pyramids, were found to form under growth conditions that led to either very large, indium enriched, or coalesced islands. All three types of ...

Stacking faults in CoCrTa/Cr, CoCrPt/NiAl, and CoCrPt/Cr/NiAl films have been studied by electron diffraction. Interfacial lattice match and epitaxial growth play important roles in reducing the stacking fault density. It is found that the bicrystal media has large stacking fault densities. In the unicrystal media case, when good epitaxy between magnetic layer and underlayer cannot be achieved,...

We derive a simple analytical line integral expression for the relaxation volume tensor of an arbitrary interconnected dislocation network. This quantity determines magnitude contribution to dimensional changes and volumetric swelling material, highlights fundamental dual role dislocations as sources internal strain well carriers plastic deformation. To illustrate applications method, we comput...

in the present study, the influence of annealing temperature on mechanical properties and the microstructure of a high manganese austenitic steel (fe-30mn-4al-4si-0.5c) was investigated. x-ray diffractometry, optical and scanning electron microscopy, hardness and tensile tests were used to analyze the relationship between mechanical properties and microstructure after annealing process. the res...