to determine the droplet characteristics of agricultural spray nozzles through water sensitive paper (wsp), the non-circular and overlapped spots appearing on the water sensitive paper surfaces are eliminated. in the conventional approach, the procedure is done according to the subjective self determined estimation of the operator. the objective of this study was to develop a practical alternat...

the spot welding is widely used for joining thin sheets in different industries; such as automotive industry. this method of welding is very easy to automate and maintain. in this study, the effect of nugget diameter on the tensile-shear strength of the spot welding joints was investigated. the specimens were manufactured from aisi 1008 hr sheets with 1.0 mm thickness. the eight different elect...

In the present research, the effects of spot-welding process parameters on the nugget diameter and electrode penetration depth of spot-welded joints were investigated. To achieve this, a spot-welded joint of three-thin sheet low carbon steels (same thicknesses of 0.8 mm) was simulated as an electerical-thermal-mechanical coupling of 3D finite element model. After validating the finite element s...

1. Intracellular responses were recorded from rods in isolated eye-cups of the snapping turtle. Chelydra serpentina. Responses to flashes of small (less than 100 mum diameter) and large (1000 mum diameter) spots of 500 nm light were studied. 2. Responses produced by small and large diameter spots which delivered less than 0-3 photons mum-2 had the same shape. The responses produced by large spo...

Mass transport of analyte to surface-immobilized affinity reagents is the fundamental bottleneck for sensitive detection in solid-support microarrays and biosensors. Analyte depletion in the volume adjacent to the sensor causes deviation from ideal association, significantly slows down reaction kinetics, and causes inhomogeneous binding across the sensor surface. In this paper we use high-resol...

We argue using experimental data that contact lines and not contact areas are important in determining wettability. Three types of two-component surfaces were prepared that contain "spots" in a surrounding field: a hydrophilic spot in a hydrophobic field, a rough spot in a smooth field, and a smooth spot in a rough field. Water contact angles were measured within the spots and with the spot con...

Light focused from air into a spherical microlens is affected by diffraction at the lens surface as its diameter approaches the wavelength of light. Through an extension of Mie theory, we show that a converging wave that is incident upon a Si microlens with a diameter less than approximately 4lambda creates a spot as much as 25% smaller than predicted with vector diffraction theory. Si microlen...