This paper preliminarily investigates the general transport properties (i.e., water sorptivity, water permeability, and gas permeability) of carbon-nanotube/cement composites. Carboxyl multi-walled carbon nanotubes (MWNTs) are dispersed into cement mortar to fabricate the carbon nanotubes (CNTs) reinforced cement-based composites by applying ultrasonic energy in combination with the use of surf...

The degradation of concrete pavements is often controlled by the transport of a deleterious species (chloride or sulfate ions, or water in the case of freeze/thaw) into the concrete. With this in mind, a three-year research project, funded by the Federal Highway Administration, has culminated in the development of sorptivity-based service life models for concrete pavements and bridge decks. To ...

The sorptivity S quantifies the effect of capillarity on liquid movement in a porous material. For liquid infiltration into an initially dry material, S is a parameter that is contingent on both liquid and material properties as well as the maximum liquid content behind the infiltrating front, hm. Scaling analyses are used to derive a dimensionless, intrinsic sorptivity S* that is constant for ...

The sorptivity S quantifies the effect of capillarity on liquid movement in a porous material. For liquid infiltration into an initially dry material, S is a parameter that is contingent on both liquid and material properties as well as the maximum liquid content behind the infiltrating front, θm. In prior work, Culligan et al. (2005) used scaling analyses to derive a dimensionless, intrinsic s...

Different types of curing compounds were applied to lab and field concrete at different times after casting. Two application methods, single and double layer applications, were employed. Concrete properties, such as electrical conductivity, moisture content, sorptivity, degree of hydration, strength, and permeability were evaluated, and the results were employed for assessment of the curing eff...

Adsorption of the chloroacetanilide herbicides acetochlor, alachlor, metolachlor, and propachlor was determined on soils and soil components, and their structural differences were used to explain their sorptivity orders. On all soils and soil humic acids, adsorption decreased in the order: metolachlor > acetochlor > propachlor > alachlor. On Ca(2+)-saturated montmorillonite, the order changed t...

Developing correlations between various soil parameters are considered the major challenge to diminish time and cost associated with field measurements. Soil hydraulic and physical properties were extensively characterized using tension disc infiltrometer and soil sampling in a silty clay agricultural field in Kalaat El-Andalous, Tunisia. Tension disc infiltrometer experiments were conducted at...

Ceramic waste is most commonly produce from ceramic industry, this waste is in the form of pest and hard form, pest waste is known as the filter waste or slurry waste, which is produced at the end of polishing and finishing of ceramic tiles. The paper discuss that ceramic slurry waste powder is replaced by cement in concrete. Concrete grade M25 was made by replacing by 0% to 30% of Ordinary Por...

Available experimental investigations on the effect of the aggregate-paste ‘interfacial transition zone’ (ITZ) on mass transport properties of cement-based materials appear to be ambiguous. Whilst some studies have found a deleterious effect of the ITZ, results from others seem to suggest otherwise. In the present study, we examined the relative influences of ITZ and microcracking on the oxygen...