Parameters from single-component isotherm models were used in multicomponent isotherm models to predict the aqueous phase sorption of trichloroethylene (TCE) in the presence of tetrachloroethylene (PCE) in four zeolites, Tenax, and three natural solids. The Langmuir, the Polanyi-Dubinin, and the Freundlich or the Langmuir-Freundlich isotherm models were used to simulate single-component sorptio...

The sorption isotherm ( desorption and adsorption ) of okro fruit was determined at three temperatures of 300C,400C and 500C within the range of 1090% Relative humidity (RH). Thymol solution was placed inside the desiccators to prevent microbial growth, particularly at the relative humidity above 65%. Gravimetric method was used for the sorption isotherm where the reading and recording was take...

In the present work, the usefulness of almond peel as a sorbent material has been investigated for the removal of methylene blue from synthetic aqueous solutions in batch conditions. Isotherm of dye sorption was measured. The influence of different experimental parameters such as: almond peel mass, particles size, temperature, initial pH of solution and NaCl concentration on this isotherm was s...

Intraparticle mass transfer processes of Phenol Blue (PB) in single octadecylsilyl (ODS)-silica gel microparticles in acetonitrile-water were analyzed by microcapillary manipulation and microabsorption methods. An absorption maximum of PB, the sorption isotherm parameters, and the sorption rate in the microparticle system were highly dependent on the percentage of acetonitrile in solution. The ...

factors that affect stability. The interaction of pharmaceutical solids with water can affect their chemical stability as well as their physical and mechanical properties. The influence of moisture on solid-state stability has therefore been extensively documented. It is important now to understand and to anticipate the behaviour of a product exposed to a variety of environmental conditions (e....

Endosulfan (ES) is a micropollutant found in reverse osmosis concentrates from water reuse applications. Electrodialysis (ED) can remove and recover charged solutes from such concentrates. While polar compounds cannot normally be removed, their fate in ED is important as they can contribute to membrane fouling/poisoning and be released during cleaning. High adsorption of ES to ED membranes was ...

We investigated the sorption of pentachlorophenol (PCP) to a surfactant-modified clay and the solubility of PCP as a function of pH and ionic strength. Pentachlorophenol is a hydrophobic ionizable organic compound; therefore, it can exist as either a protonated or adeprotonated species. The objectives of this study were to determine differences in the sorption and solubility of the two species ...

[1] Seinfeld JH. Air pollution: physical and chemical fundamentals. New York: McGraw Hill; 1975. p. 1–26. [2] Arthur CS. In: Measuring, monitoring, and surveillance of air pollution, vol. 3. New York: Academic Press; 1976. p. 183–305. [3] Tseng HH, Wey MY, Liang YS, Chen KH. Catalytic removal of SO2, NO and HCl from incineration flue gas over activated carbonsupported metal oxides. Carbon 2003;...

Adsorption of ammonia from anaerobic digester effluent by magnetically modified zeolite (MMZ) has been investigated using a batch technique and comparison of adsorption isotherm equations. Adsorption isotherm models were utilized to describe the equilibrium isotherms and the isotherm constants were calculated. The sorption of ammonia follows Langmuir, Freundlich and Dubinin-Radushkevich (D-R) m...

This study explored the feasibility of using granular ferric hydroxide as adsorbent for the removal of NO3-N. Optimum conditions for NO3-N removal were found to be pH 5.0 and equilibrium time 80min. The equilibrium sorption isotherm was better described by Langmuir sorption isotherm model. The maximum sorption capacity of granular ferric hydroxide was 4.254mg/g at 298K. A comparison of four kin...