this article describes the preparation and analysis of nano hydroxyapatite (ha) films on stainless steel 316l through sol-gel technique. the process started with preparation of a nitrate and phosphate sol. after aging the sol for 24 h at room temperature a ss316 substrate was dip-coated and heat-treated at 350 to 450 °c for different times in air. the coating phase and structure on substrate we...

nanostructured alumina thin films were coated on stainless steel by sol-gel dip coating method. in order to prevent crack formation, al2o3 films were kept in a solvent bath immediately after coating to reduce the rate of drying. effects of calcination temperature and withdrawal speed on structural properties were analyzed using xrd and sem. topography and thickness of coatings were analyzed by ...

limn2o4 spinel cathode materials have been successfully synthesized by solid-state reaction. surface of these particles were modified by nanostructured lifepo4 via sol gel dip coating method. synthesized products were characterized by thermally analyzed by thermogravimetric and differential thermal analysis(tg/dta), x-ray diffraction (xrd), scanning electron microscopy (sem), and energy dispers...

in this paper, zno thin film is deposited on slide glass substrate using the sol-gel process. presenting well-defined orientation of zno thin films nanostructure were obtained by dip coating of zinc acetate dihydrate, monoethanolamine (mea), de-ionized water and isopropanol alcohol. the annealed zno thin films were transparent ca 85-90% in visible range with an absorption edges at about 375 nm....

Previous studies have shown that the barrier effect and the performance of organic-inorganic hybrid (OIH) sol-gel coatings are highly dependent on the coating deposition method as well as on the processing conditions. However, studies on how the coating deposition method influences the barrier properties in alkaline environments are scarce. The aim of this experimental research was to study the...

Recent developments in the preparation of surfactant-templated mesostructured sol-gel silica materials have extended the morphology from the originally discovered powders, with particle sizes on the order of microns, to mesoporous continuous thin films. These films could find applications in membrane-based separations, selective catalysis and sensors. Particularly, sodium dodecyl sulfate (SDS)t...

as we know sol-gel is one of the most important techniques for thin film preparation. in this paper, high transmission silica thin films have been prepared by dip-coating process from a new silicon-alkoxide solution. the prepared sol was stable for 45 days which is very important to characterize the coating process. the optical properties as a function of aging time, withdrawal rate, and heat t...

The aim of this in vitro study was to evaluate the effect of silica and aluminosilicate nanocomposite coating of zirconia-based dental ceramic by a sol-gel dip-coating technique on the bond strength of veneering porcelain to the yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) in vitro. Thirty Y-TZP blocks (10 mm ×10 mm ×3 mm) were prepared and were assigned to four experimental groups...

As we know sol-gel is one of the most important techniques for thin film preparation. In this paper, high transmission silica thin films have been prepared by dip-coating process from a new silicon-alkoxide solution. The prepared sol was stable for 45 days which is very important to characterize the coating process. The optical properties as a function of aging time, withdrawal rate, and he...

Highly transparent and luminescent CaMoO4:Eu/Ag composite films were fabricated on glass substrates as multifunctional antireflective (AR) coatings. The films were deposited through a combination of a sol–gel dip-coating technique and a hot water treatment. With the addition of an aluminum source in coating solutions, the sol–gel-derived films underwent a remarkable microstructural change durin...