The laboratory tests for measuring the effects of small strain to the shear strength and maximum stiffness development of post-cyclic degradation of hemic peat are reviewed in this paper. A series of laboratory testing has been conducted to fulfil the objective of this research to study the post-cyclic behaviour of peat soil and focuses on the small strain characteristics. For this purpose, a n...

SHAKE2000 and DEEPSOIL are the two most important programs to calculate the response analysis of soil layer. In order to analyze the similarities and differences between them, and to guide the improvement of the method and program of seismic response analysis of soil layer, 25 KiK net seismic records from 9 stations were selected as the research objects in this paper, from the aspects of surfac...

56 ground motions of the bedrock and surface are selected from 28 stiff sites ( site class I and site classⅡ) of the KiK-net station．The peak acceleration, response spectra and shear strain of actual hard sites are calculated by using SHAKE2000 and LSSRLI-1. The similarities and differences between SHAKE2000 and LSSRLI-1 and their differences from measured records are analyzed. It provides a ba...

This paper focuses on the response of circular machine foundation resting on different soils (sand and clay) through studying the variation of soil shear strength parameters and strain with the number of cycles. The objective of the current study is to explore the results related to the parameters of the dynamic load (number of loading cycles and frequency of load) related to the circular footi...

During consolidation process of saturated cohesive soil the soil stiffness increases. Increase of the effective stress due to dissipation of excess pore pressure causes additional stiffness of soil mass. This phenomenon has a very important effect on the behavior of saturated cohesive soils during dynamic loading. In the current investigation the changes in maximum shear modulus. Gmax and dampi...

Offshore wind turbine (OWT) foundations are subjected to a combination of cyclic and dynamic loading arising from wind, wave, rotor and blade shadowing. Under cyclic loading, most soils change their characteristics including stiffness, which may cause the system natural frequency to approach the loading frequency and lead to unplanned resonance and system damage or even collapse. To investigate...

A new simple shear apparatus is fabricated which is capable of applying monotonic and cyclic load on soil specimens. A series of tests was conducted to study the pore pressures (or suction), volume change, and shear behavior of the soil samples with anisotropic consolidation pressure. The simple shear apparatus is capable of controlling as well as measuring pore-air and pore-water pressure in t...

Response of soil depends on both the mechanical properties of soil itself and the nature of loading. Many geotechnical engineering problems are associated with dynamic and cyclic loadings, such as ocean wave or ice loading applied on foundations of offshore structures or bridges, dynamic loading applied on foundations of offshore wind power structures, ocean wave loading on harbor structures, s...

This article focuses on physical characteristics of snail soil from Ljubljana marsh and their influence on geomechanical characteristics. Mineral and chemical composition, visual appearance, specific surface and grain property of the snail soil were determined. The geomechanical characteristics were investigated for their dependence on the physical characteristics. These relationships are expre...

Small strain testing of dynamic soil properties such as threshold strains, tv , are often conducted using specialized devices such as dual-specimen simple-shear, as devices configured for large strain testing produce noisy signals in the small strain range. Working with a simple shear device originally developed for large-strain testing, we extend its low-strain capabilities by characterizing n...