Solid oxide fuel cells (SOFCs) with proton conducting electrolyte (H-SOFCs) are promising power sources for stationary applications. Compared with other types of fuel cells, one distinct feature of SOFC is their fuel flexibility. In this study, a 2D model is developed to investigate the transport and reaction in an H-SOFC fueled with syngas, which can be produced from conventional natural gas o...

In this article, a dynamic, lumped model of a Solide Oxide Fuel Cell (SOFC) is described, as a step towards developing control relevant models for a SOFC combined with a gas turbine (GT) in an autonomous power system. The model is evaluated against a distributed dynamic tubular SOFC model. The simulation results confirm that the simple model is able to capture the important dynamics of the SOFC...

Carbon deposition considered in a solid oxide fuel cell (SOFC) model may be influenced by the operating voltage, inlet water/methane ratio, working temperature and pressure, inlet molar fraction of fuel and so on. The effects of these parameters in a planar SOFC implementing a novel bi-layer interconnector are not well understood. This paper is focused on the numerical study of carbon depositio...

The objective of this paper was to design energy integrated solid oxide fuel cell (SOFC) based microcombined heat and power (micro-CHP) systems using syngas derived from lignocellulosic biomass waste. The novel contributions of this work include 1) integration of syngas between a community-scale biomass gasification plant and SOFC based micro-CHP systems in buildings; 2) heat integrated designs...

Based on the benchmark solid oxide fuel cell (SOFC) dynamic model for power system studies and the analysis of the SOFC operating conditions, the nonlinear programming (NLP) optimization method was used to determine the maximum electrical efficiency of the grid-connected SOFC subject to the constraints of fuel utilization factor, stack temperature and output active power. The optimal operating ...

In this paper, we consider Wiener nonlinear model for solid oxide fuel cell (SOFC). The Wiener model of the SOFC consists of a linear dynamic block and a static output non-linearity followed by the block, in which linear part is approximated by state-space model and the nonlinear part is identified by a polynomial form. To control the SOFC system, we have to consider various view points such as...

This study applies four different types of machine learning methods to model the power performance behaviour of a tubular solid oxide fuel cells (SOFC) under different operating conditions. The corresponding machine learning methods are: artificial neural network (ANN), fuzzy inference system (FIS), support vector machine (SVM), and genetic programming (GP). By using four types of inputs of the...

Power generation using gas turbine power plants operating on the Brayton cycle suffers from low efficiencies. In this work, a solid oxide fuel cell (SOFC) is proposed for integration into a 10 MW gas turbine power plant, operating at 30% efficiency. The SOFC system utilizes four heat exchangers for heat recovery from both the turbine outlet and the fuel cell outlet to ensure a sufficiently high...

Introduction: The direct use of CH4 as the feed to the solid oxide fuel cell (SOFC) will allow elimination of a reformer, simplifying the SOFC system and decreasing the system cost [1]. The overall reaction on the anode catalyst in the direct CH4 SOFC is the electrochemical oxidation of CH4: CH4 + 4O CO2 + 2H2O + 8e. Due to the nature of hydrocarbon reactions at high temperature and the reducin...

........................................................................................................................ I LIST OF PAPERS .............................................................................................................. II TABLE OF CONTENTS ................................................................................................. VII 1 INTRODUCTION ............