in this study, rice husk and sodium silicate solution were used to produce particleboards. sodium silicate was used as bonding aid by 25, 20, 15, 10, 5 and zero percent (based on rice husk dry weight). to modify the mechanism of bondability, one percent of 4,4’-diphenylmethane diisocyanate (mdi) was added for every five percent less sodium silicate solution. the effect of diisocyanate on bondab...

To evaluate the physiological responses of chrysanthemum to silicon spray in non-stress conditions, this study was performed in two separate experiments (at 4 to 5 and 8 to 12-leaf stages) as a factorial randomized completely design with two factors: silicon source (in two levels: sodium silicate and calcium silicate) and the concentration of silicate at five levels (0, 50, 100, 150 and 200 mg ...

The present study describes for the first time the synthesis of silica nanoparticles starting from sodium silicate and oleic acid (OLA). The interactions between OLA and sodium silicate require an optimal OLA/OLANa molar ratio able to generate vesicles that can stabilize silica particles obtained by the sol-gel process of sodium silicate. The optimal molar ratio of OLA/OLANa can be ensured by a...

due to the problems of deposition of sodium silicate on the equipment and decrease of the service age of implements, deinking of old newspaper was accomplished using organic complex of sulvy-x in place of sodium silicate. sulvy-x was used at four levels of 0.3, 0.5, 0.7 and 1% on the basis of oven dry waste paper and chemical deinking was done. the effect of various charges of sulvy-x was inves...

induction of systemic resistance to cucumber against marginal leaf blight disease caused by pseudomonas marginalis using silicon application (as 1 &2 mm of sodium silicate) was studied under greenhouse conditions. results indicated that application of 2 mm of sodium silicate remarkably increased resistance in cucumber against the pathogen. according to the results, disease severity in plants tr...

An all-aqueous sol-gel method for encapsulation of bacterial cells in porous silicate matrices towards the development of a biosensor is described. The sol-gel encapsulation of cells is achieved at room temperature and neutral pH. Furthermore, use of sodium silicate as precursor avoids generation of alcohol that can be detrimental to cells in contrast to the traditional alkoxide sol-gel encapsu...

a new chemical grouting method has been developed for conglomerate formations based on the experimental studies. due to the lack of chemical grouting experience of conglomerate formations, the testing programs were performed to evaluate the performance of chemical grouting in the water sealing of part of conglomerate foundation of karkheh earth dam using a combination of field and laboratory te...

the effects of cementation and the physical properties of grains on the shear behavior of grouted sands are investigated in this paper. the consolidated-undrained triaxial shear behavior of three grouted carbonate sands with different physical properties, including particle size distribution, particle shape and void ratio, was studied. two sands were obtained from the north shores of the persia...

This paper examines the compressive strength of sodium silicate bonded cores for aluminum casting with different additives. Various materials are used as additives among which it is found that 5% sand size bauxite has the best effect on both gas strength and de-coring 98.5% silica content sand with 70-90 AFS No. with 4% sodium silicate is used. The results indicate that although very good colla...