full factorial experimental design (23) for the evaluation of slurry ethylene polymerization in the presence of an industrial ticl4/mgcl2 ziegler-natta catalyst was employed. the following parameters were used as independentvariables: al/ti molar ratio, reaction temperature and hydrogen partial pressure. the total polymerization pressure was 9 bar. catalyst activity, mfi (melt flow index) and m...

ethylene was polymerized in slurry phase over a ticl4/mg(oc2h5)2 catalyst activated by al(c2h5)3. it was shown experimentally that mass transfer resistance has no effect on polymerization kinetics. after estimation ofthe active site concentration by inhibition method with carbon monoxide, the effects of polymerization temperature, monomer and cocatalyst  oncentrations and hydrogen were investig...

copolymerization of ethylene and propylene was investigated using a 4th generation phthalate ziegler-natta catalyst in normal hexane in a buchi reactor. the effects of different mole fractions of [al]/[ti], [si]/[al] and various amounts of hydrogen on productivity and weight percent of ethylene on the product, were studied. in the copolymerization reactions, tri-isobutyl aluminum (tibal) was us...

the effects of temperature, time and the strategy of prepolymerization were studied on the morphology of polypropylene particles. propylene polymerization was carried out in slurry phase using 4th generation of ziegler-natta catalyst, cyclohexylmethyl dimethoxysilane as external electron donor, and triethyl aluminum as co-catalyst. prepolymerizations were carried out based on two strategies: is...

Defect-free microporous carbon layers on graphite can be produced by DABCO-catalyzed twin polymerization of 2,2'-spirobi[4H-1,3,2-benzodioxasiline] in a slurry polymerization and subsequent thermal transformation of the resulting phenolic resin into carbon.

This research shows the dependence of number average degree of polymerization (DPn) of mung bean starch (MBS) on starch slurry concentration, acid/starch slurry ratio, time and temperature in acid modification process. Optimizing these factors to earn as low as possible DPn was evaluated by using the Response Surface Methodology (RSM) with reduced Central Composite Face-Centered (reduced CCF) m...

in the current work, ethylene polymerization was investigated from a mathematical modeling point of view. the initiation (activation), propagation, termination, and deactivation reactions were taken into account and the relevant equations used in the modeling were obtained from the elementary reactions. some assumptions including neglecting the transfer and deactivation reactions were considere...

Spray dry granulation of clay minerals was studied to obtain clay mineral base support material for metallocene supported olefin polymerization catalysts. The morphology of the granules was strongly influenced by the nature of the clay mineral itself. Because of swelling characteristics of montmorillonite, its water dispersion was highly viscous even in the low slurry concentration (< 4 wt %). ...

in this article, a complete model for the mixed flow slurry reactor for polymerization of ethylene to high density polyethylene in the presence of ziegler-natta catalyst is presented. in addition to the effects of the multiple active sites, the effect of other important parameters such as the catalyst concentration, co-catalyst, hydrogen, monomer, impurities and pressure on the mass-average and...

0