Multiphase flows are commonly encountered in oil and gas industries. The transport of multiphase flow causes the formation of slug, the increase of pressure drop and the possibility of phase changes therefore, a set of simulation runs was performed to predict flow regimes in a horizontal pipeline, and the results were compared with the Baker chart. The effects of small downward inclinations of ...

In two-phase slug flow pattern, the bulk of the gas is trapped inside large bubbles that are separated by liquid slugs, which may contain small dispersed bubbles. The unsteady nature of slug flow makes the prediction of pressure drop and heat and mass transfer a difficult task. Earlier models that deal with steady slug flow assume constant lengths and shapes of liquid slugs and elongated bubble...

Demand for high-performance cooling systems is one of the most challenging and virtual issues in the industry and Pulsating heat pipes are effective solutions for this concern. In the present study, the best predictor correlations of flow boiling and condensation are taken into account to model a single turn pulsating heat pipe mathematically. These considerations, result in derivation of more ...

multiphase flows are commonly encountered in oil and gas industries. the transport of multiphase flow causes the formation of slug, the increase of pressure drop and the possibility of phase changes therefore, a set of simulation runs was performed to predict flow regimes in a horizontal pipeline, and the results were compared with the baker chart. the effects of small downward inclinations of ...

The translational velocities of elongated bubbles in continuous slug flow were measured for various flow rates, pipe inclinations and pipe diameters. Measurements were carried out by cross-correlating the output signals of consecutive optical fiber probes and by image processing technique. In addition, the velocities of single elongated bubbles in a stagnant and in a flowing liquid were measure...

The current offshore oil & gas multi-phase production and transportation installations have big challenges related with the slugging flow: An unstable multi-phase flow regime where the flow rates, pressures and temperatures oscillate in the considered processes. Slug can be caused by different operating conditions and installation structures. The most severe slugs are often induced in long vert...

In this paper, numerical investigation of upward two phase flow of air-water has been studied. Different conditions of flow regimes including annular, wispy annular, slug, churn and bubbly are simulated based on Hewitt and Roberts map, and a good agreement between the experimental data of the map and the numerical simulation has been observed. Accordingly, a proper CFD model in CFD software of ...

 A VOF-CSF model is developed to model slug flow in capillary channels  Non-uniform mesh is employed to reduce the simulation expenses  A moving reference frame is set moving along or opposite to the gas slug to eliminate the spurious current  The calculated liquid film thickness, slug velocity, and circulation flow ahead the gas slug are all agree very well with literatures Approach and Im...

Slugging flow in offshore oil & gas multi-phase transportation pipelines cause big challenges as the flow regime induces flow and pressure oscillations in the multi-phase pipelines. The negative impacts of the most severe slugs are significant and thus the elimination of slugging flow in the pipelines is a highly investigated topic. To eliminate the slug in an online manner real-time slug detec...