the excessive biological sludge production is one of the disadvantages of aerobic process such as sbr. so the problem of excess sludge production along with its treatment , and disposal in aerobic processes in municipal and industrial waste water can be seen in many parts of the world even in our country . to solve the problem of excess sludge production , reducing in by oxidizing some of the s...

The following sludge reduction alternatives were tested in wastewater biological reactors: oxic-settling-anaerobic (OSA-process); ultrasonic disintegration (UD); chlorination (CH); 3,3',4',5tetrachlorosalicylanilide (TCS); and folic acid (FA). Compared to the control system, UD reduced 55% of the sludge production, and greater substrate and nutrient removal efficiency was achieved. CH worsened ...

osa (oxic settling anoxic) process is one of the sludge reduction methods. in this method an anaerobic reactor is placed in activated sludge recycling line for sludge reduction purpose. this method is getting popular because of possibility of its application in currently operating waste water treatment plants. in this research, the performance of osa process in sludge reduction in sbr was impro...

This study evaluates the application of an anoxic side-stream reactor in the sludge return line of a conventional activated sludge system for the reduction of biomass production. The oxidation-reduction potential was maintained at -150 mV while the applied sludge loading rate was modified by changing the percentage of return sludge treated in this reactor. The observed yield from the convention...

Sago industries effluent containing large amounts of organic content produced excess sludge which is a serious problem in wastewater treatment. In this study ozonation has been employed for the reduction of excess sludge production in activated sludge process. Central composite design is used to study the effect of ozone treatment for the reduction of excess sludge production in sago effluent a...

aims: in biological wastewater treatment processes, a large amount of sludge is produced. stabilization of sludge is essential before disposal because of the risks to human health and environment. therefore, selecting an appropriate process for stabilization this sludge may efficiently decrease risks. the aim of this study was to examine the compound efficiency of the advanced fenton and ozonat...

Oxic-settling-anaerobic process (OSA) was known as a cost-effective way to reduce the excess sludge production with simple upgrade of conventional activated sludge process (CAS). A low oxidation-reduction potential (ORP) level was the key factor to sludge decay and lysis in the sludge holding tank of the OSA process. However, the ORP control with nitrogen purge or chemical dosing in the OSA pro...

Sludge production is an avoidable problem arising from the treatment of wastewater. The sludge remained after municipal wastewater treatment contains considerable amounts of various contaminants and if is not properly handled and disposed, it may produce extensive health hazards. Application of aquatic worm is an approach to decrease the amount of biological waste sludge produced in wastewater ...

sludge production is an avoidable problem arising from the treatment of wastewater. the sludge remained after municipal wastewater treatment contains considerable amounts of various contaminants and if is not properly handled and disposed, it may produce extensive health hazards. on the other hand, this sludge has benefits for plants and soils. thereupon, land application of sludge has received...