experimental tests were performed to study the seismic behavior and performance ofmodified steel chevron braced frame systems, which incorporate a vertical slotted connection(vsc) detail between the top of the braces and the floor beam above. the vsc detail isintended to prevent vertical load transfer to the beam and limit brace forces to thecompressive resistance of the members. full-scale qua...

This paper evaluates the effect of slot existence with limited length between flanges and web junction of I-shaped beams at the region of moment connections on vertical force and shear stress distribution in beam flanges and web at connection section in comparison with classical theory of stress distribution. The main purpose of this research is to evaluate the efficiency of the slot in connect...

Beam connections with reduced drilled section and slotted web have been presented after the Northridge earthquake (1994). Their new geometrical shapes have been resulted in weakening of beams and subsequently the bette rperformance of connections in the earthquakes. In this research, the advantages of both connections, mentioned above, have been studied in the Slotted Web Drilled Flange (SWDF) ...

This paper details tests on steel-wood-steel connections with thin dowels carried out at the University of British Columbia in Vancouver, Canada. Connections configurations were selected in such a way that the influence of the main parameters such as dowel slenderness ratio, dowel strength, fastener spacing and end distance and the number of dowels could be studied. An important issue of the pa...

In this paper, we are concerned with the performance at the media access control (MAC) layer of the protocol stack when multibeam adaptive antenna arrays are employed at the base station site. Specifically, we analyze the performance of slotted ALOHA when the base station receiver uses multibeam antenna arrays capable of steering the beams selectively on smaller sectors. The effect of different...

beam to column welded connection with radius cut on beam flange is known as rigid connection that provides acceptable ductility for special moment resisting frame (smrf). in order to decrease the cost of construction and to provide an easy-to-construct structure, the new method is available for reducing the beam section based on drilling on beam flange , known as drilled flange connection (dfc)...

This paper presents design of an alternating-phase fed single-layer slotted waveguide array for a sector shaped beam in the Eplane radiation pattern. A sector beam pattern is very effective for radar applications for detecting obstacles in a certain angular range without mechanical or electronic scanning. The sector shaped beam with 13 degree beam width is synthesized by a cascade of T-junction...

the basic strategy of reduce the ductility demand and related concentrated tensions at moment resistance connections is reduce the section of the beam at connected region to column. by this method plastic hinge done at the reduced cross section and this local reduction decreases the demand of the components of connection. on this basis, in present study a new beam-to-column moment connection wi...

Precast concrete structures in Iran are generally designed as continuous columns with hinged beams, thereby making them simple frames. In this system in site show walls in two directions of buildings guaranteed lateral resisting system. However, in order to obtain a seismic resisting frame, the connection between beam and column should be moment resisting and ductile, allowing the formation of ...

Possibilities for the extension of the operational frequency band of slotted waveguide antennas are studied. It is shown that by using both conventional longitudinal slots and subarraying techniques it is possible to reach the relative bandwidth of about 15%. This result is illustrated by the development of a novel slotted waveguide antenna for high-resolution SAR applications. The antenna oper...