the fuel cells are distinguished as generating of green allocable energy and are electrochemical devices of low environmental impact. porous nanocrystalline strontium-doped lanthanum manganite la0.8sr0.2mno3 (lsm) cathode materials were prepared by mechanochemical route in various grinding times. carbon black was employed to produce pores. the formation of lsm single phase was studied by x-ray ...

OBJECTIVES To evaluate short-term effects of publishing revised lower risk national drinking guidelines on related awareness and knowledge. To examine where drinkers heard about guidelines over the same period. DESIGN Trend analysis of the Alcohol Toolkit Study, a monthly repeat cross-sectional national survey. SETTING England, November 2015 to May 2016. PARTICIPANTS A total of 11 845 adu...

Porous wicks for use in a loop heat pipe were sintered from copper and Monel powder. These wicks were characterized in terms of their shrinkage, porosity, thermal conductivity, liquid permeability and maximum capillary pressure. The effect of fabrication parameters (particle size and sintering conditions) on these properties was studied. Shrinkage was found to increase with increasing sintering...

he possibility to obtain sintered material from alkaline basaltic tuffs is demonstrated. The parent rock was milled for 10–15 min, the resulting owder was pressed at 100 MPa and the obtained samples were heat-treated in the range of 1000–1140 ◦C. The sintering behaviour and the phase ormation were studied by pycnometry, dilatometry, DTA, XRD and SEM. The final material was obtained by sintering...

The fuel cells are distinguished as generating of green allocable energy and are electrochemical devices of low environmental impact. Porous nanocrystalline strontium-doped lanthanum manganite La0.8Sr0.2MnO3 (LSM) cathode materials were prepared by mechanochemical route in various grinding times. Carbon black was employed to produce pores. The formation of LSM single phase was studied by X-ray ...

Results about the vitrification of several hazardous iron-rich industrial wastes (from productions of Zn and Cu metals, as well as EAFD and MSWA) and the usage of obtained glasses for synthesise of sintered glass-ceramics are summarises. It is shown that the appropriated method of sinter-crystallization mainly depends on the crystallization trend of used glasses. When the parent composition is ...

Piezoelectrics have been widely used in different kinds of applications, from the automobile industry to consumer electronics. The novel multilayer piezoelectrics, which are inspired by multilayer ceramic capacitors, not only minimize the size of the functional parts, but also maximize energy efficiency. Development of multilayer piezoelectric devices is at a significant crossroads on the way t...

Glass-ceramic materials, obtained by sinter-crystallization of melted alkaline-olivine basaltic tuffs, were investigated. The kinetics of bulk crystallization was evaluated by differential thermal analysis (DTA) at different heating rates. The phase formation and the sintering behavior of glass powders (<75 lm) were studied in air and in nitrogen atmospheres by DTA and dilatometry, respectively...

The objective of the present study was to evaluate the effect of sintering condition on matrix formation and subsequent drug release from polymer matrix tablet for controlled release. The present study highlights the use of a microwave oven for the sintering process in order to achieve more uniform heat distribution with reduction in time required for sintering. We could achieve effective sinte...