Ti–6Al–4V powder preforms containing parallel layers of steel wiremeshes are sintered into composites. Elongatedmacropores are created by electrochemical dissolution of the steel wires, and equiaxedmicroccepted 17 August 2009

In this study, Ti-5Al-2.5Fe alloy was prepared by powder metallurgy. The elemental titanium, aluminum, and iron powders were mechanically alloyed for 10 h in a vacuum atmosphere. A stainless steel jar and stainless steel balls were used for mechanical alloying. The alloyed powders were then sintered by vacuum hot pressing at 950 °C for a soaking time of 30 minutes. Pure titanium was also sinter...

producing parts with high density and improved mechanical properties is one of the most important aims of powder metallurgy process. there are many factors for attaining modified properties in sintered parts but among them controlling type and quantity of alloying elements and manufacturing parameters such as compacting pressure, sintering temperature are the most effective.in this research, tw...

In order to obtain the bulk brick like samples, the mixture of steel slag, and sintering aid additive (like dolomite, glass, perlite, borax and phosphate sodium) were sintered at 1100°C for 2 minute. The flat and bloated surface appearances were obtained. The bulk densities of final sintered composites were from 1.3 to 2.41 g/cm3 and total porosities were from 15 to 40%. The bending strengths v...

A novel sintered cutting stainless steel fiber felt with internal channels (SCSSFFC) composed of a stainless-steel fiber skeleton, three-dimensional interconnected porous structure and multiple circular microchannels is developed. SCSSFFC has a jagged and rough surface morphology and possesses a high specific surface area, which is approximately 2.4 times larger than that of the sintered bundle...

A combination of the high damage tolerance of TRIP-steel and the extremely low thermal conductivity of partially stabilized zirconia (PSZ) can provide controlled thermal-mechanical properties to sandwich-shaped composite specimens comprising these materials. Sintering the (TRIP-steel-PSZ)/PSZ sandwich in a single step is very difficult due to differences in the sintering temperature and densifi...

This paper investigates the tribological behavior of 100Cr6 steel pin running against sintered steel bearing material used in hermetic compressors. Tests were conducted under dry and starved lubrication sliding conditions in air at room temperature. Although porous structure acts as crack initiation sites thus limiting the wear resistance of sintered iron in dry sliding conditions under high co...

in the present study, the mechanical properties and fracture mechanisms of two powder metallurgy low alloy steels, i.e. distaloy dh and distaloy hp, were investigated. all samples were sintered at 1120 ºc for 30 min in n2/h2 atmosphere. for evaluation of the effect of cooling rate on final properties, samples were cooled from sintering temperature with two different cooling rates. in addition, ...