The rapidly solidified prealloyed alpha brass powder with a size range of 40 to 100 μm produced by water atomization process was consolidated using liquid phase sintering process. The relationships between sintering temperature, physic-mechanical properties and microstructural characteristics were investigated. Maximum densification was obtained at 930 °C, under 600 MPa compacting pressure,...

Sintering of metal powders is a well-established industrial process for specific applications, which allow a cheap series production of metal parts even with complex shape. The residual porosity, always present in sintered power compacts, limits their mechanical strength. On the other hand, for several products such porosity is needed. Products of that kind are for example: metal filters showin...

Magnetic abrasive machining is a surface finishing technique in which a magnetic field is used to force abrasive particles against the target surface. As such, finishing of conventionally inaccessible surfaces (e.g., the inside surface of a long curved pipe) is possible. The aim of this paper is to study maximum efficiency in terms of material removal rate with respect to magnetic flux density ...

In this study; iron based powder metal (PM) bushing compacts were sintered via medium frequency induction heating system. Iron based powders were mixed with 2 wt.% copper (Cu), 0.3 wt.% carbon (C) and 1 wt.% zinc stearat (Zn-st) via V-Type mixer. PM compacts were sintered by 2 different sintering processes. One of them was conventional sintering method other was medium frequency induction sinte...

In this paper, we propose a fuzzy aggregate production planning (APP) model for blending problem in a brass factory which is the problem of computing optimal amounts of raw materials for the total production of several types of brass in a period. The model has deterministic and imprecise parameters which follows triangular possibility distributions. The brass casting APP model can not always be...